@SupremeDorian wait a second is this for real? you guys write bios for other users, for free? If that is the case then I'd sign up for it, in case you guys are not too busy
@LieutenantSOT try the following in this order:
use mirror, check if everything is connected, ensure that one side has reversed rotation and the other does not
upgrade the gyro if necessary (or add another)
add a scaled down tailfin (make it huge then scale it down so you can nudge it into your plane)
make sure the tailwheel is not able to turn (unless you need it to)
@LieutenantSOT also use the mirror tool to ensure that everything is even plus put the engines on one side to reverse rotation (this makes them rotate in the opposite direction, which means that the torque gets countered out) the side does not matter as long as the opposite side has normal rotation propellers
@LieutenantSOT use some gyros and infinite fuel blocks (i have infinite fuel blocks in all of my aircraft, you should remove all of the fuel in the aircraft before installing those) plus change Wing-3 and Wing-5 to Wing-2 (structural wing)
@BagelPlane @banbantheman well rip, i had a really good racer (which could be entered in any tournament because it uses a modified version of my Flatfish's piston engine) for any future tournaments
@F104Deathtrap but there is 2 problems, one that the periscope is blocked by some fuselage in front of it and 2 that i also want to find a way to install two windows so that the player could look outside but not have that odd bumpy look of the normal custom fuselages that would be needed (or minimize the bumpy fuselage appearance
@PapaKernels it is kinda thicc, and the real deal had the following dimensions:
Length: 48 ft 2.25 in (14.6876 m)
Wingspan: 26 ft 8 in (8.13 m)
27 ft 11.875 in (8.53123 m) with wing-tip missiles
Height: 13 ft 4.5 in (4.077 m)
the tail was also not swept irl
so ~ 24 out of 30 for appearance, flight testing is yet to be done
note, that ~ sign is a tilde, it is supposed to mean "about"
*edit:19/20 for performance, the drag is a little higher than normal but otherwise it acts like an f-5
@LieutenantSOT yup so that is why i called this thing a hippopotamus because hippopotamuses are big and i want a hippopotamus for christmas, only a hippopotamus will do (xd not really)
@WiiMini no problem (btw later comets had different windows)
@SupremeDorian wait a second is this for real? you guys write bios for other users, for free? If that is the case then I'd sign up for it, in case you guys are not too busy
@CreeperOfTheFortress hey nexus industries happens to have an extremely similar name as NexusCorp which is our corporation so what do we do
@LieutenantSOT try the following in this order:
use mirror, check if everything is connected, ensure that one side has reversed rotation and the other does not
upgrade the gyro if necessary (or add another)
add a scaled down tailfin (make it huge then scale it down so you can nudge it into your plane)
make sure the tailwheel is not able to turn (unless you need it to)
no it's the sike of death
@LieutenantSOT also use the mirror tool to ensure that everything is even plus put the engines on one side to reverse rotation (this makes them rotate in the opposite direction, which means that the torque gets countered out) the side does not matter as long as the opposite side has normal rotation propellers
@LieutenantSOT use some gyros and infinite fuel blocks (i have infinite fuel blocks in all of my aircraft, you should remove all of the fuel in the aircraft before installing those) plus change Wing-3 and Wing-5 to Wing-2 (structural wing)
@Jwpdaviesjr no
+1@Travis21h just clip a deattacher in a block via xml
@DeltaBravoSix no problem
+1@K2K negative drag
@DeltaLCI no the doug demuro thingy
@LT556 you can try it on my d-11 (both armors) i will give you permission
dont deploy them
parachutes still work as armor i think
+1@DemonicCryptid go here instead
@CenturyAerospace i have tried and all reverse airbrake propulsion does to my aircraft when it hits the water is send it to andromeda
@DemonicCryptid
Me: sees challenge
Also me:well time to make this bad boi
@BagelPlane @banbantheman well rip, i had a really good racer (which could be entered in any tournament because it uses a modified version of my Flatfish's piston engine) for any future tournaments
it kinda flys then (albeit very slowly)
*halfway up
@DameTheNewbie put vtol halfway
@PotatoX nice try, but it isn't close to beating mine
this is shockingly underrated
@F104Deathtrap i mentioned you on the post
just tell me if this would be impossible
@F104Deathtrap but there is 2 problems, one that the periscope is blocked by some fuselage in front of it and 2 that i also want to find a way to install two windows so that the player could look outside but not have that odd bumpy look of the normal custom fuselages that would be needed (or minimize the bumpy fuselage appearance
@banbantheman i could try making a really long camera that is extremely thin with overload or using clipped cameras for external view
+1@banbantheman but that ain't realistic
+1@rexrexThezion thats why i need help
@Visify i summon thee from thy grave so thou shall assist me in this project
nice job
@PapaKernels idk maybe a funky trees expression for airbrakes that pop out once hitting a certain speed or decreasing the power
@DeltaLCI send me a link to this unholy failure
@PapaKernels just in case you couldn't see the tilde, it's supposed to be an approximation symbol
@PapaKernels it is kinda thicc, and the real deal had the following dimensions:
Length: 48 ft 2.25 in (14.6876 m)
Wingspan: 26 ft 8 in (8.13 m)
27 ft 11.875 in (8.53123 m) with wing-tip missiles
Height: 13 ft 4.5 in (4.077 m)
the tail was also not swept irl
so ~ 24 out of 30 for appearance, flight testing is yet to be done
note, that ~ sign is a tilde, it is supposed to mean "about"
*edit:19/20 for performance, the drag is a little higher than normal but otherwise it acts like an f-5
@winterro just make them kinda springy (but not too much, or else you'd have a flying blob of shaped gelatin)
@AndrewGarrison @avgarrison595 who do we believe, this is starting to feel like a csi miami episode
+5gëtš đrä₣tëđ
+1@WNP78 @AndrewGarrison @weebabyseamus @PhilipTarpley @joeysellers @HellFireKoder @NathanMikeska
yay a fellow romanian @TigerTactical98
@LieutenantSOT yup so that is why i called this thing a hippopotamus because hippopotamuses are big and i want a hippopotamus for christmas, only a hippopotamus will do (xd not really)
@AndrewGarrison welp rip my efforts to find out about a hidden era of SimpleHistory
+8aeiou
+4@LieutenantSOT i was inspired by this demonic contraption
@winterro might as well make a quetzalcoatlus wih that
@RuvienRuvienTheCitizen @banbantheman wtf
+1@RuvienRuvienTheCitizen @banbantheman here's your croissant
+1@avgarrison595 hallelujah
+1@RailfanEthan that is also what i think (i think it was a test account made by Andrew to test the upvote system or the old rating system)
+3@WarHawk95 it may have been a test account (possibly)