Nice! You made some really good changes. If you also put the CoM in front of the CoL, it will fly in a stable manner on its own without a gyro. You have a ton of potential I can see so I’m looking forward to your next build. You also got yourself a new follower!
@BombWay I don’t mean adding external area. I mean taking the wing part and scaling it down, then adding it into the inside of the aircraft. That way you get more wing area without it changing how the plane looks
This plane looks really good and despite what you say, it’s a very stable aircraft. One thing with it though is it seems rather under manoeuvrable for an aircraft of its size, shape, and power. Adding more overall wing area will help with that and also maybe having slightly larger surface area with the control surfaces (namely the canards and elevators). I would also recommend moving the CoM a little forward if you do add more wing area. That way it will be able to perform tighter turns
@barreto2016 simple does not mean bad! If there are any which you want me to help you with in the future let me know. I’d be happy to make them fly well
@barreto2016 no problem! If you need any help with adjusting your planes for performance feel free to ask! You are a good builder so it would be nice if your planes flew perfectly too :)
I really like this! The off centre forward gear really suits this aircraft. I will say though that the nose and fuselage feels too short. The cockpit should be in the same place but the fuselage should stick out forward a tad bit more. Yaw is also inverted. Trim would also be nice too. Other than this I really like the build!
@CrushburnHQ I have a tip for you with the cannon but DO NOT disable the aircraft collisions on it. If you disable that, it won’t be able to hit other aircraft. What you can do is make the gun shape out of fuselage parts and right at the end sticking out slightly is where you put the cannon. XML edit it so that it’s the barrel and base length is as short as possible. That way it will still work :)
The plane itself looks great and is pretty decent overall. However, with a few small changes it could be excellent. Mainly, the engine is far too strong for the type of fighter it appears to be. It gives it an extremely fast acceleration which takes away from the realism felt with the rest of the build. If you reduce the power dramatically and then reduce the drag points to roughly 2000, it will still have a high top speed but will also have realistic acceleration. Secondly, the rear gear and CoM should be closer together. When the rear gear is right behind it, take off is much smoother. One other minor detail is that the cannon placement doesn’t exactly make sense. Having it embedded in the fuselage or nose would fit much better. I hope this info helps because I really can see the amazing potential held by this build and I bet that you can make even more fantastic aircraft in the future!
@TrislandianAlliance well thankfully I do 99% of my building on mobile (because I weirdly like using mobile more than my computer) so it works out for me hahaha
For your first upload it’s pretty good but still has a few problems, namely the landing gear. Make sure all landing gear parts do not interact with other parts (disable the collisions)
Hans... Get ze flammenwerfer
How many upvotes do the top 3 users get?
Did you build this yourself? Also you might want to rethink about that description you put there.
@barreto2016 no problem buddy! Also congratulations on Gold!
@Shippy456 ahhhh I see. I haven’t played that in a long time but my guess is that they added Sweden?
I bet building this was a real struggle
Nice! You made some really good changes. If you also put the CoM in front of the CoL, it will fly in a stable manner on its own without a gyro. You have a ton of potential I can see so I’m looking forward to your next build. You also got yourself a new follower!
Can you put a link to the original build?
Why not make this unlisted?
@GiuliMBorgesYT np!
@Shippy456 what do you mean?
Beautiful! The details are impeccable
@CrushburnHQ Cheers buddy! I appreciate it and I’m glad you think so :)
@BombWay I don’t mean adding external area. I mean taking the wing part and scaling it down, then adding it into the inside of the aircraft. That way you get more wing area without it changing how the plane looks
This plane looks really good and despite what you say, it’s a very stable aircraft. One thing with it though is it seems rather under manoeuvrable for an aircraft of its size, shape, and power. Adding more overall wing area will help with that and also maybe having slightly larger surface area with the control surfaces (namely the canards and elevators). I would also recommend moving the CoM a little forward if you do add more wing area. That way it will be able to perform tighter turns
@barreto2016 simple does not mean bad! If there are any which you want me to help you with in the future let me know. I’d be happy to make them fly well
@barreto2016 thanks my friend!
@barreto2016 no problem! If you need any help with adjusting your planes for performance feel free to ask! You are a good builder so it would be nice if your planes flew perfectly too :)
I really like this! The off centre forward gear really suits this aircraft. I will say though that the nose and fuselage feels too short. The cockpit should be in the same place but the fuselage should stick out forward a tad bit more. Yaw is also inverted. Trim would also be nice too. Other than this I really like the build!
“ Kom uit het land van rood wit blauw en de gouden leeuw”
Nice changes! It flies better for sure
@CrushburnHQ sure thing! I’ll check it out
@plane98 no worries :) When I finish the basic shape I will show you if you want
@CrushburnHQ I have a tip for you with the cannon but DO NOT disable the aircraft collisions on it. If you disable that, it won’t be able to hit other aircraft. What you can do is make the gun shape out of fuselage parts and right at the end sticking out slightly is where you put the cannon. XML edit it so that it’s the barrel and base length is as short as possible. That way it will still work :)
I really like this build! It’s fun to fly and looks very unique
The plane itself looks great and is pretty decent overall. However, with a few small changes it could be excellent. Mainly, the engine is far too strong for the type of fighter it appears to be. It gives it an extremely fast acceleration which takes away from the realism felt with the rest of the build. If you reduce the power dramatically and then reduce the drag points to roughly 2000, it will still have a high top speed but will also have realistic acceleration. Secondly, the rear gear and CoM should be closer together. When the rear gear is right behind it, take off is much smoother. One other minor detail is that the cannon placement doesn’t exactly make sense. Having it embedded in the fuselage or nose would fit much better. I hope this info helps because I really can see the amazing potential held by this build and I bet that you can make even more fantastic aircraft in the future!
Excellent! It looks good and flies pretty well too
This is really neat! Works very well and looks cool
That is long
This may be the 20th draken in the past 2-3 weeks but I’m certainly not complaining! I love it!
@Planeacceleration just reduce the drag with XML
This is really really cool. Lovely looking fighter with nice features. Maybe the gun placement is a bit awkward but otherwise I love it
@CrushburnHQ you’re very welcome!
@TrislandianAlliance well thankfully I do 99% of my building on mobile (because I weirdly like using mobile more than my computer) so it works out for me hahaha
@TheMachinist I just tested it out and it works perfectly!
@TheMachinist great! Thanks for the tip!
@Yeetflightgamer I know this was a while ago but why was he banned? I remember seeing him around here a lot before I took a short break
For your first upload it’s pretty good but still has a few problems, namely the landing gear. Make sure all landing gear parts do not interact with other parts (disable the collisions)
@SnoWFLakE0s interesting. Thanks for sharing! I can’t seem to find it but if you happen to come across the post can you tag me?
This is pretty well made! Enjoyable to fly and it looks nice too
Damn this is really neat! It looks very well made and functions great. Lovely job!
@Diloph yes I’m british hahaha. Americans spell a lot of words differently than with normal English lol 😝
This is really awesome! I love the little guy popping out of the hatch
Phenomenal work Diloph! It looks fantastic in this paint scheme, I wish the RAF had more aircraft in this colour. Really nice work
Wonderful! It looks like a mix between JF-17 Thunder and F-20 Tigershark. Very nice aircraft!
Pretty disappointing to see you pretending you made this yourself and bypassing the auto credit system. You should add credit or take this down
@Tang0five With the current global predicament we are in, I don’t blame you hahaha
@Tang0five to be fair it’s usually a MiG-15
This plane looks really good and the details are great but it’s far too responsive and manoeuvrable for the type it is. Nevertheless I really like it
Really well made! All the details on this are really incredible and give it life