This is really incredible. Such a wonderful build of a fantastic looking aircraft! I love how manoeuvrable this build is as well. That may not be realistic but it sure is very very fun
This is pretty good so far! The fuselage and main wings are looking good (especially with those great engines and cockpit!) but the tail section is a little different. The rear of the fuselage, where the APU is supposed to go, needs to be way thinner and the elevators should be a fair bit smaller. Try having a diagram open while you’re building to compare to the real thing. Apart from this though, it’s great! Some detail would be nice but it’s still very good
@MrPorg137 if that was possible, I would be very very happy. I hate having to ask people to XML parts for me or just searching through dozens of planes for parts I can save and modify for my needs
@Hedero yessir! It’s a pretty great series of aircraft. If you’re ever thinking about buying a light GA plane, I highly recommend taking a look at those
@Lufftwaffe2007 well the wings should be 2 meters shorter and the fuselage about 4 meters longer. Also the wings are not swept back at all but they do get slightly thinner at the tip than at the root. They are also further up on the fuselage. Try working with a 3 angle diagram of one when getting the angles, profile, and proportions right. I do that for my replicas and it really helps
@MrPorg137 canvas stitching. Most WWI aircraft were made from canvas and when you look at their wings, you can see the lines of stitching where they are connected. Its a lot of work but it would look really great on this plane!
This is a really nice build! The two things that would maybe improve it are custom control surfaces and some canvas stitching. Either way, this is still really good!
This looks fantastic! It’s a little hard to fly but once you get the hang of it you can actually do some of the manoeuvres this aircraft is famous for. Nice work!
Nice looking plane! I like the connection to the tail section, reminds me a little of a DH Vampire or venom. One thing that could be changed though is the elevator and stabiliser could be moved above the jet exhaust as this would destroy it in real life. Nevertheless, awesome build!
This is such an awesome looking and functioning plane! Would be awesome if a plane could have some sort of CIWS but sadly physics exists lol. Also, is it a UAV?
This is really incredible. Such a wonderful build of a fantastic looking aircraft! I love how manoeuvrable this build is as well. That may not be realistic but it sure is very very fun
Pretty nice Tomcat
@JicamaLord hahaha I figured. I used to make things like this too
Well damn this is really cool! Very well built
Very cool! I didn’t know they made a drone variant of the F-16F
Not too bad!
This is pretty good so far! The fuselage and main wings are looking good (especially with those great engines and cockpit!) but the tail section is a little different. The rear of the fuselage, where the APU is supposed to go, needs to be way thinner and the elevators should be a fair bit smaller. Try having a diagram open while you’re building to compare to the real thing. Apart from this though, it’s great! Some detail would be nice but it’s still very good
Cool aircraft design! Thank you for your participation in the challenge!
@MrPorg137 if that was possible, I would be very very happy. I hate having to ask people to XML parts for me or just searching through dozens of planes for parts I can save and modify for my needs
This is really very nice! What a lovely looking jet and a fun one to fly too
@Hedero yessir! It’s a pretty great series of aircraft. If you’re ever thinking about buying a light GA plane, I highly recommend taking a look at those
@asteroidbook345 it could also be an aircraft which first flew during that time
@MrPorg137 lol at least you can attempt to use mods. On iOS it’s quite tough
@asteroidbook345 it only needs to have been used. So most mid to late WWII aircraft also work for this challenge but then so do early jet fighters
@MrPorg137 fair enough. I do all my building on mobile and it works fine for me but it is very hard to build small details like that on the phone
@Lufftwaffe2007 well the wings should be 2 meters shorter and the fuselage about 4 meters longer. Also the wings are not swept back at all but they do get slightly thinner at the tip than at the root. They are also further up on the fuselage. Try working with a 3 angle diagram of one when getting the angles, profile, and proportions right. I do that for my replicas and it really helps
@LeonardoEngineering I could swear it’s just the word for ragu that comes from Bologna.
@tntwiley huh that’s odd. I wouldn’t know why
@MrPorg137 canvas stitching. Most WWI aircraft were made from canvas and when you look at their wings, you can see the lines of stitching where they are connected. Its a lot of work but it would look really great on this plane!
Very nice build! Thank you for your participation in this challenge
@Hedero practice and rated for 6gs so you can do some awesome stunts!
@Hedero exactly! Pop over to France for the weekend hahaha. An RV-4 would also be a great aircraft to have since you could do so much with it
This is a really nice build! The two things that would maybe improve it are custom control surfaces and some canvas stitching. Either way, this is still really good!
This looks like a very interesting design, quite creative. Nice build overall
@MDDJB well it flies pretty good so I wouldn’t worry about that too much
@Hedero that’s a lot of time! I’d also love to own one of these one day along with a cub
Not too bad. It needs some finetuning but you got the overall shape and profile almost perfect!
Looks very unique! Cool airplane design. I couldn’t figure out why this flew so odd until I realised the engines were tail rotors hahaha
@Mumpsy would make more sense if that design was Italian because it would have essentially been a large and expensive Bolognese maker hahaha
Incredible! This is so well made and the detail is fantastic too. Lovely to see a plane that looks great and flies great too
Beautiful! It’s a great looking helicopter and you really did it justice! You wouldn’t be interested in making an Mi-24A variant would you?
@Hedero oh yes! Quite a lot actually. The warrior and archer II are probably the two planes I few the most in my life so far.
This is fantastic! It really looks like what they hoped would come out of the Leduc 0.22 (or how I would envision it at least). Beautiful!
Amazing! This is such a wonderful replica. I love flying these in real life, especially the archer version
Okay
@asteroidbook345 fantastic! I’m looking forward to seeing it!
Great to hear!
This looks fantastic! It’s a little hard to fly but once you get the hang of it you can actually do some of the manoeuvres this aircraft is famous for. Nice work!
@NSSKILLER101 would love to see what you’d make!
@Juk1 no problem :)
Alrighty
It already sounds awesome. The way to my heart is through mustangs hahaha
Nice looking plane! I like the connection to the tail section, reminds me a little of a DH Vampire or venom. One thing that could be changed though is the elevator and stabiliser could be moved above the jet exhaust as this would destroy it in real life. Nevertheless, awesome build!
This is such an awesome looking and functioning plane! Would be awesome if a plane could have some sort of CIWS but sadly physics exists lol. Also, is it a UAV?
Pretty cool looking fighter!
Nice! I like it
Absolutely stunning replica
@Fastwaffle233 I suppose some people just need attention
@tntwiley that is quite odd. Do you make sure that the rotator is attached to the rest of the wing fuselage piece
@Viper3000ad well thank you very much!