@Hedero yessir! It’s a pretty great series of aircraft. If you’re ever thinking about buying a light GA plane, I highly recommend taking a look at those
@Lufftwaffe2007 well the wings should be 2 meters shorter and the fuselage about 4 meters longer. Also the wings are not swept back at all but they do get slightly thinner at the tip than at the root. They are also further up on the fuselage. Try working with a 3 angle diagram of one when getting the angles, profile, and proportions right. I do that for my replicas and it really helps
This is a really ambitious build! Looking promising so far but maybe try getting the wings the right shape and angle. Also the fuselage should be a little longer for how large the wings are and the turret is
@MrPorg137 canvas stitching. Most WWI aircraft were made from canvas and when you look at their wings, you can see the lines of stitching where they are connected. Its a lot of work but it would look really great on this plane!
This is a really nice build! The two things that would maybe improve it are custom control surfaces and some canvas stitching. Either way, this is still really good!
@LeonardoEngineering I agree with that. It also feels a little Italian. I get a Macchi or Regia vibe from it. It looks good enough to be made by one of them
This looks fantastic! It’s a little hard to fly but once you get the hang of it you can actually do some of the manoeuvres this aircraft is famous for. Nice work!
Nice looking plane! I like the connection to the tail section, reminds me a little of a DH Vampire or venom. One thing that could be changed though is the elevator and stabiliser could be moved above the jet exhaust as this would destroy it in real life. Nevertheless, awesome build!
This is such an awesome looking and functioning plane! Would be awesome if a plane could have some sort of CIWS but sadly physics exists lol. Also, is it a UAV?
@Hedero yessir! It’s a pretty great series of aircraft. If you’re ever thinking about buying a light GA plane, I highly recommend taking a look at those
@09thiccfish no worries!
+1@asteroidbook345 it could also be an aircraft which first flew during that time
Lol when I downloaded this without mods it was so disappointing, no legs and no gun hahaha
+1@MrPorg137 lol at least you can attempt to use mods. On iOS it’s quite tough
@asteroidbook345 it only needs to have been used. So most mid to late WWII aircraft also work for this challenge but then so do early jet fighters
This looks really great! The way you made the engine was really smart. Work smarter, not harder hahaha
+1@MrPorg137 fair enough. I do all my building on mobile and it works fine for me but it is very hard to build small details like that on the phone
@Lufftwaffe2007 well the wings should be 2 meters shorter and the fuselage about 4 meters longer. Also the wings are not swept back at all but they do get slightly thinner at the tip than at the root. They are also further up on the fuselage. Try working with a 3 angle diagram of one when getting the angles, profile, and proportions right. I do that for my replicas and it really helps
This is phenomenal, what a beautiful aircraft! Thank you very much for your participation in the challenge
+2This is a really ambitious build! Looking promising so far but maybe try getting the wings the right shape and angle. Also the fuselage should be a little longer for how large the wings are and the turret is
+1@LeonardoEngineering I could swear it’s just the word for ragu that comes from Bologna.
This is great! I love it
+1Beautiful!
+1@tntwiley huh that’s odd. I wouldn’t know why
@MrPorg137 canvas stitching. Most WWI aircraft were made from canvas and when you look at their wings, you can see the lines of stitching where they are connected. Its a lot of work but it would look really great on this plane!
Very nice build! Thank you for your participation in this challenge
@Hedero practice and rated for 6gs so you can do some awesome stunts!
@Hedero exactly! Pop over to France for the weekend hahaha. An RV-4 would also be a great aircraft to have since you could do so much with it
This is a really nice build! The two things that would maybe improve it are custom control surfaces and some canvas stitching. Either way, this is still really good!
This looks like a very interesting design, quite creative. Nice build overall
@MDDJB well it flies pretty good so I wouldn’t worry about that too much
@Hedero that’s a lot of time! I’d also love to own one of these one day along with a cub
Not too bad. It needs some finetuning but you got the overall shape and profile almost perfect!
Looks very unique! Cool airplane design. I couldn’t figure out why this flew so odd until I realised the engines were tail rotors hahaha
@Mumpsy would make more sense if that design was Italian because it would have essentially been a large and expensive Bolognese maker hahaha
I do also agree with the first comment though
+1Incredible! This is so well made and the detail is fantastic too. Lovely to see a plane that looks great and flies great too
Beautiful! It’s a great looking helicopter and you really did it justice! You wouldn’t be interested in making an Mi-24A variant would you?
Isn’t this a copy of someone else’s?
+3@Hedero oh yes! Quite a lot actually. The warrior and archer II are probably the two planes I few the most in my life so far.
This is fantastic! It really looks like what they hoped would come out of the Leduc 0.22 (or how I would envision it at least). Beautiful!
Amazing! This is such a wonderful replica. I love flying these in real life, especially the archer version
@LeonardoEngineering I agree with that. It also feels a little Italian. I get a Macchi or Regia vibe from it. It looks good enough to be made by one of them
+3Okay
Lovely! Thank you for this entry to the challenge. Is there a backstory to it at all?
+1@asteroidbook345 fantastic! I’m looking forward to seeing it!
Great to hear!
This looks fantastic! It’s a little hard to fly but once you get the hang of it you can actually do some of the manoeuvres this aircraft is famous for. Nice work!
@NSSKILLER101 would love to see what you’d make!
Lovely build! It really looks like an early to mid war fighter. The cockpit is great too, you got the canopy shape down well
+2@Juk1 no problem :)
Alrighty
It already sounds awesome. The way to my heart is through mustangs hahaha
This is so cool! It reminds me of an XB-70 but then made into a fighter. Also it would be cool to see thrust vectoring from those exhausts
+1Nice looking plane! I like the connection to the tail section, reminds me a little of a DH Vampire or venom. One thing that could be changed though is the elevator and stabiliser could be moved above the jet exhaust as this would destroy it in real life. Nevertheless, awesome build!
This is such an awesome looking and functioning plane! Would be awesome if a plane could have some sort of CIWS but sadly physics exists lol. Also, is it a UAV?
Pretty cool looking fighter!
Nice! I like it
Your aircraft are becoming increasingly more incredible! Wonderful build
+2