@asteroidbook345 I tagged you on this old post so not many people would find it, but about randomusername's gender, she tol me she's actually trans. So male-to-female I presume. But I'm perfectly ok with her being trans, I know some people on the website would make fun of that so just keep this between you and me I guess.
Yeah I'm still friends with her on discord, we rarely talk but I tell you what she is crazy smart. Or at least I think so. She may have Traumatic Brain Injury but that doesn't stop her from doing impressive mathematics. @asteroidbook345
Nah it's still being worked on. I just started it after the Epervier and I need to get the Epervier done first because it's for a challenge. @ssenmodnar
I do have discord. Hedero #9172 I will not be accepting every request I get, to all the people seeing my discord info. I only accept people I know. @HellouUnt
I'm using pistons instead of rotators. Would that be the reason it's not working? Cause the slats will shift forward and backwards several times before either sitting full forward or fully retracted. @SnoWFLakE0s
Except this code used on the aircraft is far more complex then what I need. All I need is for the slats to deploy when exceeding (x) degrees. I don't need them to deploy at low/high speeds or whatever. I tried "AngleOfAttack < 50" but it didn't work. Warhawk95 told me to try it but whenever I put code in it doesn't seem to work as I wish. And of course if you don't feel like messing with code right now that's perfectly fine. @SnoWFLakE0s
Hey bro, I'm asking you 'cause I don't know if LeMosse is still active on the site or not. But I am making a basic prop plane called the M.S. 1500 Epervier and it utilizes slats. I was wondering what a good code function would be for them. I believe they only deploy based on angle of attack, as they aren't very complex. Thanks ft god. @SnoWFLakE0s
I have decided to never build a float airplane again, those are some of the worst airplanes to make. And the grumman goose has extremely difficult landing gear to build, so no, sorry. And also I am not specifically building any aircraft of a certain manufacturer, I just build aircraft that I like. @R2d2hunter
Wow that's crazy, I can imagine that wing flutter on this thing could be beyond uncontrollable, but the material composite they use in the winspars fix it I guess. @Starbound
Yeah the x-31 is crazy but the x-29 was actually called the most unstable in the wikipedia. So I think it's pretty close but the x-29 probably wins.@Starbound
Oh hey baconeggs. I don't recall ever seeing you on the site. But yeah the flightmodel on this aircraft isn't finished yet, I still wanna make it fly a bit better, maybe more unstable and manueverable, and the speed needs correcting massively. @BaconEggs
Thanks! @ZsozsoFatR
Thanks dude! I appreciate it. @CRJ900Pilot
Thanks dawg @EternalDarkness
@EternalDarkness hey could you make this a successor to this?
Can't click on the link but thanks for the info! @AviationRevelation
On who? @RandomUser09
Thanks! @ACEPILOT109
@asteroidbook345 I tagged you on this old post so not many people would find it, but about randomusername's gender, she tol me she's actually trans. So male-to-female I presume. But I'm perfectly ok with her being trans, I know some people on the website would make fun of that so just keep this between you and me I guess.
Yeah I'm still friends with her on discord, we rarely talk but I tell you what she is crazy smart. Or at least I think so. She may have Traumatic Brain Injury but that doesn't stop her from doing impressive mathematics. @asteroidbook345
Bruh too bad not a single girl my age is on the website. The only one was randomusername but then she left lmao @asteroidbook345
Not intentionally but yeah sort of. @asteroidbook345
Nah it's still being worked on. I just started it after the Epervier and I need to get the Epervier done first because it's for a challenge. @ssenmodnar
I know right 😂 I couldn't even showcase one normal landing in this thing. @tsampoy
You tryna get people to find my location brah lmao jk @RandomUser09
I do have discord. Hedero #9172 I will not be accepting every request I get, to all the people seeing my discord info. I only accept people I know. @HellouUnt
Thank you Bogdan. And yes this airplane IS a rockcrawler with this type of landing gear :-) @BogdanX
Amog Use @HellouUnt
This will be for WarHawk95's challenge, I'm wishing I did a Vautour instead, I am growing tired of this aircraft lol.
That stupid lag spike 🙄
Lol, it's hard work! @KnightOfRen
Yeah, well it's fine. I'll do something about it. Thanks for trying! @SnoWFLakE0s
What @KnightOfRen
I'm using pistons instead of rotators. Would that be the reason it's not working? Cause the slats will shift forward and backwards several times before either sitting full forward or fully retracted. @SnoWFLakE0s
Except this code used on the aircraft is far more complex then what I need. All I need is for the slats to deploy when exceeding (x) degrees. I don't need them to deploy at low/high speeds or whatever. I tried "AngleOfAttack < 50" but it didn't work. Warhawk95 told me to try it but whenever I put code in it doesn't seem to work as I wish. And of course if you don't feel like messing with code right now that's perfectly fine. @SnoWFLakE0s
Hey bro, I'm asking you 'cause I don't know if LeMosse is still active on the site or not. But I am making a basic prop plane called the M.S. 1500 Epervier and it utilizes slats. I was wondering what a good code function would be for them. I believe they only deploy based on angle of attack, as they aren't very complex. Thanks ft god. @SnoWFLakE0s
I have decided to never build a float airplane again, those are some of the worst airplanes to make. And the grumman goose has extremely difficult landing gear to build, so no, sorry. And also I am not specifically building any aircraft of a certain manufacturer, I just build aircraft that I like. @R2d2hunter
I sent you a friend request @MonsterAvgeek
Ok awesome @MonsterAvgeek
Oh lol, thank you. @Dimitry393
pinecone
You asked me 1.3 years ago!? @Dimitry393
Thankyou mate @hunterfox20
Lmao yeah @Beefy
Bruh I have no idea, I know nothing about that sort of stuff, 'cause I have issues with the same thing sometimes. @MonsterAvgeek
Wow that's crazy, I can imagine that wing flutter on this thing could be beyond uncontrollable, but the material composite they use in the winspars fix it I guess. @Starbound
Yeah the x-31 is crazy but the x-29 was actually called the most unstable in the wikipedia. So I think it's pretty close but the x-29 probably wins.@Starbound
Whoa I've never responded to someone so fast in my life, I literally logged on exactly when you posted the comment lol. @ChrisPy
Well that's odd. But I guess that's why its so manueverable. And I'm guessing it has a flight control computer to help stabilize it. @ChrisPy
The F-22 is unstable? @ChrisPy
Yep XD@KnightOfRen
Sure thing bud @rexzion
Wow, that thing flies awful lmao @BaconEggs
Yeah I'll definitely try it out. @BaconEggs
True, but the front looks mostly like it, and the nose gear. But nothing else really. @asteroidbook345
Hmm ok. Thanks for the tip! I'll try to implement that into the final touches of the flight model. @BaconEggs
How would it not be? It's clearly an f-5. @asteroidbook345
Oh hey baconeggs. I don't recall ever seeing you on the site. But yeah the flightmodel on this aircraft isn't finished yet, I still wanna make it fly a bit better, maybe more unstable and manueverable, and the speed needs correcting massively. @BaconEggs
Thanks! @ACEPILOT109
Thanks @HellouUnt
Bro how did you know @PoinX25tlessWhyShouldI