@RailfanEthan Here is the GE 44 Tonner you asked for, I hope you enjoy it!
Now I will begin constructing the Union Pacific DDA40X that @PLANS requested!
Thanks! @RailfanEthan
Once this challenge finishes, I will resume construction on more freight cars for my Canadian Pacific ES44AC. Hope you Enjoy!
P.S. Try Group 4 and VTOL up for a Surprise ;)
INSTRUCTIONS:
Steer with roll.
Group 1: Foreward/Reverse Gear and Tank Turning (use VTOL for Foreward/Reverse Gear and Roll to Turn).
Group 2: Gun Rotation 180 Degrees (use VTOL).
Group 3: Gun Pitch 30 Degrees (use VTOL).
Group 4: Deploy Machine Guns and Rocket Pods (VTOL up).
Group 5: Activate Machine Guns and Rocket Pods.
Uh, did you even change anything from MY original design? I'd have no problem if you modified it, then posted it as yours; but I do have a problem with you re-uploading my aircraft, without even asking me. This kind of thing was banned by the developers a while ago, so I have no idea why you didn't get the message. Please at least credit me next time, and don't take other people's designs.
@WeaselZone I have improved your WMP with many more features that allow it to travel faster, corner better, land on the aircraft carrier, fly through and crash into bridges, and land easier.
Congratulation @WeaselZone on making your first working airplane!
I will redesign your aircraft for purposes such as flying through bridges, landing on the USS Jundroo, flying, and most important; not exploding. Please check out some of my aircraft @FasterThanLight.
I am currently in the process of converting this ship for different purposes; such as an aircraft launcher or battleship.
If you wish, you can change my design in any way to suit whatever purpose you want. Feel free to upvote!
Here are the controls:
Activation Group 1: Propulsion - use roll to steer.
Activation Group 2: Rotate Crane - use VTOL slider.
Activation Group 3: Raise/Lower Crane - use VTOL slider.
Activation Group 4: Extend/Retract Crane - use VTOL slider.
Activation Group 5: Rotate Crane Claw - use VTOL slider.
Activation Group 6: Open/Close Claw.
@b.90 This aircraft looks very good, but it is hard to see it in the picture as it's dark colours blend with the backdrop. My suggestion to you is that you re-upload this aircraft in a different colour, or retake the photos from a different angle that would allow the viewer to see the aircraft in better clarity. Over all though, I am exited to try this aircraft out when the update comes to IOS. At this point it is impossible for me to download this.
@FIRESHOTER I believe that multiplayer would be a great idea, especially if there were team dogfights; you make a team with your friends and you battle other teams across the world, that would be entertaining! Or there could be something as simple as dogfighting your friends over a LAN server, I think that would be entertaining enough.
@AndrewGarrison Have you considered making this game multiplayer? I can completely see me and my friends dogfighting our own planes against each other on a LAN server.
I think that adding multiplayer would be a great addition to this amazing game!
@AeroEngineering I do have the train, but my IPad refuses to upload it. I can upload it in sections, then you can save each section as sub-assemblie. You can then connect all of the sub-assemblies together to form the complete train.
@aeroengineering sorry I took so long to update you upon the simple train build project, I have been trying hard to post the train so far, but my IPad cannot handle it. if you are still interested I can upload the train in small sections...
If you have simpleplanes for PC you can take the numerous trains detach the cars, save them as sub-assemblies and connect them together as a whole.
Just warning you theta you have to remove all cockpits to save it as a sub assembly, it took me a while to figure out...
@AeroEngineering my iPad died before I was able to upload the train...
It kept crashing so I have to divide the train further.
When I find my charger I will upload it.
@AeroEngineering I have put all the current train cars together and connected them to my locomotive, but my IPad mini couldn't handle it so I divided them up between two trains.
Would you like me to upload them?
@RailfanEthan Here is the GE 44 Tonner you asked for, I hope you enjoy it!
Now I will begin constructing the Union Pacific DDA40X that @PLANS requested!
@PLANS I'll build it after the GE 44 Tonner, and can I just say that is a MASSIVE Locomotive!
I'll get started on the GE 44 Tonner tomorrow. @RailfanEthan.
@RailfanEthan Hope you Enjoy!
@RailfanEthan Now I'll get started on the GP9!
@traindude48 Yeah, I can tell!
Your profile pic is an ES44AC.
@RailfanEthan Sure, when I'm done the Oil Tank Car, I'll build the GP9, after that, I'll build the GE 44 Tonner.
@RailfanEthan I'm currently working on and Oil Tank Car to go with my ES44ACs any other car suggestions?
@RailfanEthan Do you like it?
@gameoa Thanks for the up vote! You should check out my other train builds. I'll continue to upload more train stuff, so feel free to follow.
Thanks! I'll fix it. @Mod
INSTRUCTIONS:
Throttle - Foreward.
Roll - Realistic Steering.
Yaw - Stable Steering.
Brake - Stop.
Thanks! @RailfanEthan
Once this challenge finishes, I will resume construction on more freight cars for my Canadian Pacific ES44AC. Hope you Enjoy!
P.S. Try Group 4 and VTOL up for a Surprise ;)
INSTRUCTIONS:
Steer with roll.
Group 1: Foreward/Reverse Gear and Tank Turning (use VTOL for Foreward/Reverse Gear and Roll to Turn).
Group 2: Gun Rotation 180 Degrees (use VTOL).
Group 3: Gun Pitch 30 Degrees (use VTOL).
Group 4: Deploy Machine Guns and Rocket Pods (VTOL up).
Group 5: Activate Machine Guns and Rocket Pods.
@Hadesrocks Alright I'll try that.
I'm also working on and engineering model.
@RyneKuczy Thanks for the upvote!
@Hadesrocks I have completed my entry for your Tank Challenge!
Please check it out.
I'm In!
@RailfanEthan
At your request, I have made a highly detailed replica of an ES44AC in a Canadian Pacific paint job. I hope you enjoy!
This is for your @RailFanEthan
I will continue to make more train cars in addition to this locomotive. Please stay tuned...
INSTRUCTIONS:
Throttle - Foreward.
Roll - Realistic Steering.
Yaw - Stable Steering.
Brake - Stop.
@Oicraftian Thanks, the plot line sounds a bit confusing, but it sounds awesome. I'll be sure to watch it after I'm done soul eater not!
Very good, although I have not yet watched the anime. What's it about?
I'm going to have to ask you to remove it by Monday, or I WILL report you.
Uh, did you even change anything from MY original design? I'd have no problem if you modified it, then posted it as yours; but I do have a problem with you re-uploading my aircraft, without even asking me. This kind of thing was banned by the developers a while ago, so I have no idea why you didn't get the message. Please at least credit me next time, and don't take other people's designs.
Absolutely Amazing!
I love the detail that really make this flying ship steampunk!
@Cedy117
@RailfanEthan Thank you, I am currently making more Locomotives and Cars.
Congrats on 1000 points! Hope you like the train.
@WeaselZone Please check out my V.T.O.L. 5.4 (Consumer Model)
@WeaselZone I have improved your WMP with many more features that allow it to travel faster, corner better, land on the aircraft carrier, fly through and crash into bridges, and land easier.
@WeaselZone I have overhauled your WMP for improved crashing, I mean flight.
Congratulation @WeaselZone on making your first working airplane!
I will redesign your aircraft for purposes such as flying through bridges, landing on the USS Jundroo, flying, and most important; not exploding. Please check out some of my aircraft @FasterThanLight.
I am currently in the process of converting this ship for different purposes; such as an aircraft launcher or battleship.
If you wish, you can change my design in any way to suit whatever purpose you want. Feel free to upvote!
Here are the controls:
Activation Group 1: Propulsion - use roll to steer.
Activation Group 2: Rotate Crane - use VTOL slider.
Activation Group 3: Raise/Lower Crane - use VTOL slider.
Activation Group 4: Extend/Retract Crane - use VTOL slider.
Activation Group 5: Rotate Crane Claw - use VTOL slider.
Activation Group 6: Open/Close Claw.
@AeroEngineering
https://www.youtube.com/watch?v=96tHZIeD2gg
@b.90 This aircraft looks very good, but it is hard to see it in the picture as it's dark colours blend with the backdrop. My suggestion to you is that you re-upload this aircraft in a different colour, or retake the photos from a different angle that would allow the viewer to see the aircraft in better clarity. Over all though, I am exited to try this aircraft out when the update comes to IOS. At this point it is impossible for me to download this.
@AeroEngineering This aircraft was used in the launch trailer for simpleplanes on steam!
@FIRESHOTER I believe that multiplayer would be a great idea, especially if there were team dogfights; you make a team with your friends and you battle other teams across the world, that would be entertaining! Or there could be something as simple as dogfighting your friends over a LAN server, I think that would be entertaining enough.
@AndrewGarrison Have you considered making this game multiplayer? I can completely see me and my friends dogfighting our own planes against each other on a LAN server.
I think that adding multiplayer would be a great addition to this amazing game!
@AeroEngineering I do have the train, but my IPad refuses to upload it. I can upload it in sections, then you can save each section as sub-assemblie. You can then connect all of the sub-assemblies together to form the complete train.
@aeroengineering sorry I took so long to update you upon the simple train build project, I have been trying hard to post the train so far, but my IPad cannot handle it. if you are still interested I can upload the train in small sections...
If you have simpleplanes for PC you can take the numerous trains detach the cars, save them as sub-assemblies and connect them together as a whole.
Just warning you theta you have to remove all cockpits to save it as a sub assembly, it took me a while to figure out...
@AeroEngineering my iPad died before I was able to upload the train...
It kept crashing so I have to divide the train further.
When I find my charger I will upload it.
@AeroEngineering My IPad just refuses to upload the train, I may have to make a third, is this ok with you?
@AeroEngineering my IPad mini doesn't like this, uploading May take a while...
@AeroEngineering I will upload the train soon, just making sure the paint job of each train cars matches the originals.
@AeroEngineering I have put all the current train cars together and connected them to my locomotive, but my IPad mini couldn't handle it so I divided them up between two trains.
Would you like me to upload them?
Thanks for the upvote!