@Sarpanitu the oversized roll surfaces are intended, as I use this plane to complete Bandit Run, Trench Run and Typhoon Circuit. About the rear stabilizers, I'll keep that in mind. Thanks for the feedback!
@JoddyFubuki788 careers concerning aircraft (pilots, avionics technicians & plane designers) are pretty expensive as a college course. And designing planes in real life isn't the same as building in simpleplanes. You have to apply real-world physics while building planes, and they must be safe for other people to use.
@JoddyFubuki788 well its hard if you want to become an airplane designer and your parents want you to choose a different career... my parents wanted me to become a mechanical engineer but I wanted to be a computer engineer, so we talked about it and well, they kinda support me, but they are in doubt of my success in the future, since they see me more successful in the career they chose for me rather than the career I chose for myself
@Supercraft888 well I feel like I don't get so much upvotes in the last few weeks but don't get disheartened. Improve your build quality, and try to time your submissions to where there is high activity in this website. (My planes that I submit around 5am-12 noon often get a lot of upvotes)
Guidelines:
-must be a successor to this challenge
-must be fictional (as long as it doesn't exist irl, then it's ok)
-must be an all-new design (not taken from any sci-fi franchise)
-must use jet en ngines (power can be edited)
-must have VTOL afterburners (power can be edited)
-max fuel cap. 20,000 gallons. (Xml editing is allowed)
-max length 50 ft.
-max height 30 ft.
-must use less than or equal to 200 parts (so that I can fully use your builds on my phone)
-max weight 20,000 lbs. (Mass scaling/negative weight is allowed)
-only wing guns/miniguns for weapons (no missiles)
-DO NOT USE MODEL PLANE!
Guidelines:
-must be a successor to this challenge
-must be fictional (as long as it doesn't exist irl, then it's ok)
-must be an all-new design (not taken from any sci-fi franchise)
-must use jet en ngines (power can be edited)
-must have VTOL afterburners (power can be edited)
-max fuel cap. 20,000 gallons. (Xml editing is allowed)
-max length 50 ft.
-max height 30 ft.
-must use less than or equal to 200 parts (so that I can fully use your builds on my phone)
-max weight 20,000 lbs. (Mass scaling/negative weight is allowed)
-only wing guns/miniguns for weapons (no missiles)
-DO NOT USE MODEL PLANE!
@JoddyFubuki788 the plane's size doesn't fit the measurements in the guidelines (it's too big), and it must be a successor of this challenge, so that plane is not allowed to enter the challenge :(
@JoddyFubuki788 thank you!
@Treadmill103 thank you!
@Sarpanitu the oversized roll surfaces are intended, as I use this plane to complete Bandit Run, Trench Run and Typhoon Circuit. About the rear stabilizers, I'll keep that in mind. Thanks for the feedback!
@CODENAMEBOB well less than 100 parts is simple for me :)
@PyrusEnderhunter well thank you! I'm still practicing how to build prop planes :)
@Liquidfox thank you!
Thank you@Sarpanitu! I want to take a break from making starfighters for a while and start practicing the art of making prop planes.
@Liquidfox thank you!
Good work!
Finally my Gyrfalcons are getting the upgrade they've been waiting for!
@Treadmill103 does well in dogfights too!
@JoddyFubuki788 i wish to join this competition soon... I have some finished designs here but too bad the contest has already started..
Nice build!
@JoddyFubuki788 nice plane!
@JoddyFubuki788 too bad I won't be fixing or building real aircraft real soon, but I'll keep in touch :)
@JoddyFubuki788 careers concerning aircraft (pilots, avionics technicians & plane designers) are pretty expensive as a college course. And designing planes in real life isn't the same as building in simpleplanes. You have to apply real-world physics while building planes, and they must be safe for other people to use.
@JoddyFubuki788 well its hard if you want to become an airplane designer and your parents want you to choose a different career... my parents wanted me to become a mechanical engineer but I wanted to be a computer engineer, so we talked about it and well, they kinda support me, but they are in doubt of my success in the future, since they see me more successful in the career they chose for me rather than the career I chose for myself
@JoddyFubuki788 I mean most of your people, I heard they often become engineers?
@JoddyFubuki788 are you studying in highschool right now? Or are you in college and planning to be an aircraft designer after you finish school?
@JoddyFubuki788 well I heard that most of you become engineers. Is that true?
@JoddyFubuki788 well prop planes are not my cup of tea, but I'd like to see you perform in the next stream!
@Supercraft888 well I feel like I don't get so much upvotes in the last few weeks but don't get disheartened. Improve your build quality, and try to time your submissions to where there is high activity in this website. (My planes that I submit around 5am-12 noon often get a lot of upvotes)
@jlewisifer Sure thing! Just follow the guidelines above
@Alienbeef0421 ganun ba? Nakalimutan ko kasi eh lol
@Alienbeef0421 what the heck.... lol xD you know where I'm from??
@JoddyFubuki788
Guidelines:
-must be a successor to this challenge
-must be fictional (as long as it doesn't exist irl, then it's ok)
-must be an all-new design (not taken from any sci-fi franchise)
-must use jet en ngines (power can be edited)
-must have VTOL afterburners (power can be edited)
-max fuel cap. 20,000 gallons. (Xml editing is allowed)
-max length 50 ft.
-max height 30 ft.
-must use less than or equal to 200 parts (so that I can fully use your builds on my phone)
-max weight 20,000 lbs. (Mass scaling/negative weight is allowed)
-only wing guns/miniguns for weapons (no missiles)
-DO NOT USE MODEL PLANE!
@JoddyFubuki788
Guidelines:
-must be a successor to this challenge
-must be fictional (as long as it doesn't exist irl, then it's ok)
-must be an all-new design (not taken from any sci-fi franchise)
-must use jet en ngines (power can be edited)
-must have VTOL afterburners (power can be edited)
-max fuel cap. 20,000 gallons. (Xml editing is allowed)
-max length 50 ft.
-max height 30 ft.
-must use less than or equal to 200 parts (so that I can fully use your builds on my phone)
-max weight 20,000 lbs. (Mass scaling/negative weight is allowed)
-only wing guns/miniguns for weapons (no missiles)
-DO NOT USE MODEL PLANE!
@Alienbeef0421 I don't :(
@JoddyFubuki788 the plane's size doesn't fit the measurements in the guidelines (it's too big), and it must be a successor of this challenge, so that plane is not allowed to enter the challenge :(
@dhtv587 thanks!
@Treadmill103 thank you!
@JoddyFubuki788 check out the Full Tilt racer in my profile
Nice design! Definitely spaceworthy!
@PyrusEnderhunter well what are you expecting? This one is made to race in grand prixes and circuits, not in a drag race
@mikoyanster I haven't set it yet but I will give a two-week window
@spefyjerbf yes I have posted it :)
@Alienbeef0421 yes of course! Check out the rules in the link above
@mikoyanster your builds are getting better over time!
@PyrusEnderhunter it's a racing craft!
@PyrusEnderhunter too small for a bomber!
@JoddyFubuki788 I have a spare frame here. Want to modify it for racing?
Nice work!
@Ephwurd Like, give it 10 torpedoes and 4 missile pods and 4 scatter cannons!
@PyrusEnderhunter of course you can! I personally would like it to carry more weapons
Nice work!
Inspired by the Origin 300 series?
Nice work!
Wow! Thank you!!
@PyrusEnderhunter nice
@CALVIN232 its ok