@ADMC
If you go to the settings on the main menu, and press Settings, there will be a little table saying what your game settings are, with Graphics, Water, Shadows and etc. if you change it to High on the blue tab then everything will become High settings in the game. The higher the settings the better the game looks.
@MechWARRIOR57 you need to be thanked. Don't worry, he might of just forgot that you commented.
@ADMC
You need to have High Settings on. Then take the paint too and click the button that says "Flat" or "Semi-Gloss' if it doesn't already say "Gloss" keep clicking until it says "Gloss" which is the glossiest.
You mean see through?
I think you have to make the characteristics (Width , Length or Height) in a negative stance like "-0.5". SR does that type of thing.
Take off from Wright airport.
Go straight ahead a bit and then turn about 3-5 degrees.
After enough time you should see Krakaboa.
Method 2:
Take off from North Airport
Go straight a bit until your past the mountains on the right.
Turn about 50-70 degrees
After a while you should see Krakaboa
K - W
Method 1:
Take off from Yeager Airport. Go straight and then turn about 4/5 degrees.
You should see Wright after a little while.
Method 2:
Take off from Bandit
Turn right until you are flying just to the right of Krakaboa.
Keep going and you should find Wright.
To fly in the areas, just have fun! Just don't turn Right or Left in between the two islands.
That should help, tell me if you need other help.
@MechWARRIOR57 your welcome
Seems pretty good for beginners!
Tad bit slow though, but I don't care about speed all that much.
Also like how the turret moves :)
@GearGuy123 nom transparent is so easy
Just get four triangular shaped fuselages and rise or run them until their tips meet. That's a 3D. A singular triangle would just be non transparent. Nothing in the games vanilla editor is transparent.
If you want transparent, as SpiritusRaptor about it, because he makes cockpits that can be classified as transparent.
@ADMC
If you go to the settings on the main menu, and press Settings, there will be a little table saying what your game settings are, with Graphics, Water, Shadows and etc. if you change it to High on the blue tab then everything will become High settings in the game. The higher the settings the better the game looks.
I need any prop with 10K HP
@MechWARRIOR57 you need to be thanked. Don't worry, he might of just forgot that you commented.
@ADMC
+1You need to have High Settings on. Then take the paint too and click the button that says "Flat" or "Semi-Gloss' if it doesn't already say "Gloss" keep clicking until it says "Gloss" which is the glossiest.
@Mox good.
@ADMC no problem
@ADMC welcome
First called Disfer
Now Mr. Goats.
Don't worry, no need to change what people call me.
@ADMC it doesn't look hard to me.
Just use some XML and voila.
What's featherfall squall? Or am I stupid?
You mean see through?
I think you have to make the characteristics (Width , Length or Height) in a negative stance like "-0.5". SR does that type of thing.
@jw1523
"Stands up as if nothing happened"
You got hoaxed bruh
@jw1523
"Death Occurs".
"Suffers epicness"
And if you want, here is between W - SPC (Sky Park City)
Method 1:
Take off from Wright.
Turn around 190 degrees
Then keep going until you see SPC
Method 2:
Take off from the USS Tiny.
Keep going until SPC can be seen.
Here's how for (Krakaboa)K - S (Snowstone)
Method
Take off from Bandit.
Turn about 45 degrees. Keep going until you find Snowstone.
And here's how you get from W - M (Maywar)
Method 1:
Take off from Wright
Turn about 95 degrees. Follow tiny islands leading you the way.
Keep going until Maywar appears.
Method 2:
Take off from North Airport
Go straight and turn about 55 degrees.
Keep going until you see the islands or Maywar
Here's how:
To fly from W - K:
Method 1:
Take off from Wright airport.
Go straight ahead a bit and then turn about 3-5 degrees.
After enough time you should see Krakaboa.
Method 2:
Take off from North Airport
Go straight a bit until your past the mountains on the right.
Turn about 50-70 degrees
After a while you should see Krakaboa
K - W
Method 1:
Take off from Yeager Airport. Go straight and then turn about 4/5 degrees.
You should see Wright after a little while.
Method 2:
Take off from Bandit
Turn right until you are flying just to the right of Krakaboa.
Keep going and you should find Wright.
To fly in the areas, just have fun! Just don't turn Right or Left in between the two islands.
That should help, tell me if you need other help.
Thank you. @KnightOfAraluen
@ViciousTNT
You forgot to read the whole description-
It's fixed now.
Thank you
@zed
How about a fictional passenger liner?
Thx
@Liquidfox
@Djbanana
@SimpleFlow
@MechWARRIOR57 that what I was thinking, speed doesn't matter too much,
Also have fun at Comic-Con, i went there a while back.
@MechWARRIOR57 your welcome
Seems pretty good for beginners!
Tad bit slow though, but I don't care about speed all that much.
Also like how the turret moves :)
@SkullHunter29
Dude, you made the biggest part of this plane:
Making it fly
That's why you need credit! :D
@SkullHunter29 Nono,
You need credit.
@oDDDynamics @Liquidfox
No need to keep working! All fixed.
I know what the fine tuner link is but not sure if it's xml
@Stegoraptorex
His YouTube name is "Bacon Eggs"
@SkullHunter29 you can try that.
Don't forget not everything has to be Disfer :D
I watched a bit of your video, and it's pretty good!
See ya@Djbanana
@PancakeAddiction well you're welcome for the follow
And yes, very aerobatic
"Aerobatic 717"
@PancakeAddiction
And it's epic.
Follower earned.
Wow!
I can tell this will definitely be worth it.
Good job!
Well done.
@KingDeadshot correct
Carmen Albatross
@GearGuy123 welcome
I do! I do it for my fans! I posted one yesterday! Shameless indeed!
Yah ya! Ja! For the Fans! FTF! Yahyah Ja ja ! "Insert rant here"
#NO SHAME AT ALL!
@GearGuy123 nom transparent is so easy
Just get four triangular shaped fuselages and rise or run them until their tips meet. That's a 3D. A singular triangle would just be non transparent. Nothing in the games vanilla editor is transparent.
If you want transparent, as SpiritusRaptor about it, because he makes cockpits that can be classified as transparent.
Nice :D
@GearGuy123 but prisms are transparent
Unless you want non transparent.
@GearGuy123 I can try.
@GearGuy123
Don't think so
I think that's only possible with fuselage blocks.
Nice! Tell your nephew that I said he's an awesome builder.
@GearGuy123
It's should
Because it's impossible to turn the tip of the nose
And only the connecting part.
@BlackEmperorDragon
I'm Forever alone
I was face planting.
Jk
@GearGuy123 well, just put the bottom from "2" "2" to "0.25" "2"
No XML required.
@GearGuy123 why a nose part?
Just add an exclamation ( ! ) before the []
will this work?
There are two different triangles and a rhombus.