@Ryad
A very long time ago I ordered an assembly model of this aircraft. The box looked something like this: https://www.scalemates.com/cs/kits/zvezda-7202-mig-21pfm-soviet-fighter--105536
@Ryad I have one more suggestion: Can you make a modification of the MiG-21PFM? This modification only adds 2 additional a gunpowder boosters(two white small barrels), designed for quick start from a place. I’ll better show you "how it works?":
https://youtu.be/JMKonb7gt2k?t=36
I recommend a video playback speed of 0.25 (slow-motion). Accelerator runs for about 4-5 seconds, then discards the barrels
@Ryad
So... The proportions of the tail side are not correct. The beginning of the vertical stabilizer is the end of the primary(main) wings. That is, you need to extend the part after the blackcolor block. Either shorten the distance from the cockpit to the rear wing plane.
it's my all suggestions
@Memri axis & wheels is disconnected? Try not to break the connection and connect additional shock absorbers to the axle. Then, through the "attachment editor", do "auto-reconnect". In the future, you can remove the central shock absorber
Сan i modify the appearance of the vehicle?
narrow nose cone is similar
@Fabiovioli more like a prototype xp-46
@Fabiovioli What happened? Yesterday I checked and this helicopter flew. There's even a gyroscope (activation group 1). VTOL regulates the lift
@Fabiovioli thanks! :)
@Memri
Will I publish this?
P.S. I just don't like tomato-red helicopters :))
@NinjaPro Cool airplane! I will wait too))
@Memri
+1Not all countries have red-white rescue helicopters. Some are yellow/orange-white
@Memri
i made.., but this is not military helicopter :))
https://www.simpleplanes.com/a/zT3org/Counvas-H927-2-rescue-helicopter
@Ryad
A very long time ago I ordered an assembly model of this aircraft. The box looked something like this: https://www.scalemates.com/cs/kits/zvezda-7202-mig-21pfm-soviet-fighter--105536
@Ryad Behind the hole for chassis, there is a special guide bar - That’s exactly where the barrels are fixed
@Ryad Barrels? At the base of the main wing (rear view). Flaps rotation axis
@Ryad the "exact location" of what?..
@Ryad
Video name: IL2 1946 MIG-21PFM TEST TEST
Autor: Steven 197106
https://www.youtube.com/watch?v=JMKonb7gt2k
@Ryad I have one more suggestion: Can you make a modification of the MiG-21PFM? This modification only adds 2 additional a gunpowder boosters(two white small barrels), designed for quick start from a place. I’ll better show you "how it works?":
https://youtu.be/JMKonb7gt2k?t=36
I recommend a video playback speed of 0.25 (slow-motion). Accelerator runs for about 4-5 seconds, then discards the barrels
@Fabiovioli
a little edited:
https://www.simpleplanes.com/a/2FwNb2/P-35-corretto
@Ryad ok :)
@Ryad
So... The proportions of the tail side are not correct. The beginning of the vertical stabilizer is the end of the primary(main) wings. That is, you need to extend the part after the blackcolor block. Either shorten the distance from the cockpit to the rear wing plane.
it's my all suggestions
Probably need to edit the rear wings and lengthen the tail - a little more maneuverability will be added
@Fabiovioli you're welcome, always happy to be of help.
@TheResistancedude thanks!
@Rovergrow np!
@Memri axis & wheels is disconnected? Try not to break the connection and connect additional shock absorbers to the axle. Then, through the "attachment editor", do "auto-reconnect". In the future, you can remove the central shock absorber
+1@Memri I like it.
A short note: try to make more than one spring per axis
+1simplified engine and hood. removed stabilizers. minor non-technical changes in appearance.
@Memri try this version download
https://www.simpleplanes.com/a/x2p16X/G-T-E-C-Trucks-G70-Heavy-mobile-friendly
@Memri
I will simplify the engine and body parts. I think it will be up to 490
@Memri Ok. Am I editing a description and publishing?
i will try to make mobile friendly version tomorrow...
What is the parts limit? 500?
@Memri I think I understood why... Parts limit?
@Memri why?
@Memri
https://www.simpleplanes.com/a/Dg442D/Counvas-Trucks-G70-Heavy
@Memri
I made an updated version of the truck (decade 1960-70s).
I redid the design a bit.
Can you make a Description&Name of the truck?
@Memri no problem! :)
@Memri
Do you need a new truck? For your company. i can create it ;)
@TheResistancedude
I want to add these missiles to ground transportation(APC)
Hm... Maybe was a:
1) "revitalize" a crane
2) disconnect containers and slightly raise them above the ship
@MASTERMEMES more realistic wheeling move
https://www.simpleplanes.com/a/h3VQn3/FH-69-Chasis-Fix
@Carroca
Yes, a slight "chameleon effect" is present here. A very interesting discovery
😉
https://www.simpleplanes.com/a/3IVJC3/AX61
@Carroca
little upgrade
@Memri
No. But I know some Italian words :)
@Memri
grazie mille!:))
Wow!
@Memri I have already done. But she doesn't spin. I have a slightly different realization
@Memri a radiolocation station(UFO over the plane)
@Memri I plan to install the military locator and slightly update the look
@Memri
Can i do modification it?
@RS769
@TheReturningHound
@Saturnite
@MasterKiryu
@Operationalsupremacy
@NinjaPro
Thank you guys!
+1@tylerdeveneuxmusic
+1Yes, sure, take it.
@DrFoxgaming thanks!
@BuiltBionixInd10 How to do it?