@Zkillerwolfe well it all depends on design. Lower wing loads tend to become janky with large control surfaces. And also, with lower wing loads you get tighter turning radii, like when you start at 400 then do a loop (pitch up) you get only a difference of 900 feet.
TIPS:
1. Drag above 1000 helps your plane from glitching (not sure if it's just from low physics)
2. Make sure you hit 2500mph while the plane is still maneuverable.
3. Agility relies on wing loading. Below 15lbs/ft² is the best (although my plane is fine at 22lbs).
@marcox43 but on my tests when you have a very low drag and a very high speed it spazzes out
@hopotumon No wheels, no problem.
@hopotumon I'm currently tuning Red Etherion, and I'm aiming for 0:39.
@hopotumon try this now. Maybe you could beat it.
@Zkillerwolfe says 40% chance of crashing in the right lane.
@marcox43 says 50.
Now @hopotumon lost to my plane.
@Jamcastillo well, a common one :P
@Zkillerwolfe huh. So I did overlook some parts for disabling.
@hopotumon too bad I can't watch it rn... On data no wifi
Somehow I feel a need for a nuke powered plane... Back to the steam revolution!
A Boeing 797 flying wing. I can build a mansion inside it lol
Somehow it looked like a MiG 21 or a Mirage F1C.
The best solution would be not using the pylon at all. Like on my AA22 Drachen.
@AndrewGarrison
On the next tourny can it begin on a time of our favor?
Somehow eight hours later, or earlier.
7am Philippine Standard Time? (GMT+08:00)
@saturn28 lmao
Try using thrust assist. It works wonders.
@Chesty whoa, seriously? O.O
FOR THE PC MASTER RACE:
With low drag (sub 100) and high speed (2500mph+) do planes spazz out and become impossible to control?
@Zkillerwolfe you have the honors of testing both my Etherions (link on past comments)
@Zkillerwolfe well it all depends on design. Lower wing loads tend to become janky with large control surfaces. And also, with lower wing loads you get tighter turning radii, like when you start at 400 then do a loop (pitch up) you get only a difference of 900 feet.
Are you filipino m8? Your name suggests it lol
TIPS:
1. Drag above 1000 helps your plane from glitching (not sure if it's just from low physics)
2. Make sure you hit 2500mph while the plane is still maneuverable.
3. Agility relies on wing loading. Below 15lbs/ft² is the best (although my plane is fine at 22lbs).
Etherion, anyone?
This plane is much danker.
@FlyingThings Are you building it yourself?
@Zkillerwolfe Dark Etherion can do 0:39 at best.... Lucky you it crashes 6 out of 10 times
Eat my sh*t get faster than 0:45 m8s
Golden Moon Etherion: 2600mph VTOL
@hopotumon meh 0.48
@Baldovino yes it has, but unlike props you decide.
Shakers maintain quite a constant speed.
Somehow shakers are like props. It's speed is limited. However you can't use shakers because we start from ground.
@Chesty yah. Make it look like a jet
DCGI Solano ftw
Isn't this the first tourny?
Had my phone not formatted, I would've had my Golden Moon X1- oh wait, I UPLOADED IT!!!
Finishes in 1:24 (unmodded)
@Generalkeath you need a TON of wings. One thing I found (on low physics) is that the best shakers are from the block-wing combo.
420/69. I forgot to mention it had to be a jet
At least it tries to avoid missiles. (Tested on 2 1600+mph parasite fighters equipped with 1 Interceptor)
25 drag + 20 primary wings = GP-199 Typhoon Trembler
@JovianPat you may want to start the game first.
@EliteIndustries1 ayyy
I'll enter. Any of the AA craft will do.
Seriously m8
I thought Steam saves your unuploaded stuff to you cloud...
According to @GoldenEagle, do a seaplane fighter.
@grtgmzlol Not familiar with collisions, eh?
@LiamW ayyyy at least it don't bounce
Mod the car engine. power=1000
@LiamW why not make the unimog heavier?
@EliteIndustries1 it does m8
@QuesoAirlines DON'T delete SP.
Instead go to
com.jundroo.SimplePlanes>files>AircraftDesigns and look for
.editor.xml then delete that file. If it don't work then gg
@EliteIndustries1 shut up m8 you jumped from 4000 to 5000 in a day lmao
@GoldenEagle
@HellFireKoder
Sometimes when you click Scale Tool or Multi Select it triggers the undo or redo button directly under it. Transparency?