@Supersoli8 If I understand correctly, you have problems with installing the gun? If so, put it on the front part of the turret and then enter the height and width from the place where the gun should stand (cords from the rotator),Next, remove the gun connection to the turret and hook it to the front side of the rotator.
Front plate thickness: 135mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 175mm
Turret front (up) armor: 160mm at 30 degrees
Turret front (down) armor: 130mm at -60 degrees
Turret middle (front) armor: 100mm
Turret middle (rear) cheek armor: 75mm
Turret rear armor: 50mm
Front plate thickness: 150mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle + 50mm plate (PS.SiCrMo65)
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 200mm
Turret front (up) armor: 190mm at 30 degrees
Turret front (down) armor: 160mm at -60 degrees
Turret middle (front) armor: 110mm
Turret middle (rear) cheek armor: 80mm
Turret rear armor: 50mm
The percentages may differ from the steel marking, for example MK-A is the worst, that is, it has the minimum values from this table, and MK-C, on the contrary, has the maximum values
@YourAverageB1BLancerSimp Why the hell did I need to develop the MBT-70 then, and especially my own MBT? Actually, the characteristics of GAMBT are not bad, if I understand correctly
@ReichRichDeutschYour
@AverageB1BLancerSimp
@Aeromax
@Mitterbin
@Voytek
@BigHeadEngineering
currently have YES units available for sale.
Price: $0.0525~0.06 million.
Package: comes with 4 months maintenanc
@Supersoli8 If I understand correctly, you have problems with installing the gun? If so, put it on the front part of the turret and then enter the height and width from the place where the gun should stand (cords from the rotator),Next, remove the gun connection to the turret and hook it to the front side of the rotator.
Т
Do you still need help?
@SPWithLizzie
@keiyronelleavgeek566
@RB107
@LunarEclipseSP
@DeeganWithABazooka
@RepublicofWrightIsles
@Schmoovebrain
@MIGFOXHOUND31BSM26
@GeneralCorpInc
@BOSSentinel
@Supersoli8
@NotRob119
@ReichRichDeutschYour
@AverageB1BLancerSimp
@Aeromax
If for some reason you want to know the composition of steel, go here
currently have 18,000 units available for sale.
Price: $1,200,000 ~ 1,800,000
Package: comes with 2 months maintenanc
Materials:
Kerrex.A10 - 12.5%
PS.SiCrMo65 - 31.25%
PS.ST52M - 31.25%
PS.SiCrMo65 - 25%
Front plate thickness: 135mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 175mm
Turret front (up) armor: 160mm at 30 degrees
Turret front (down) armor: 130mm at -60 degrees
Turret middle (front) armor: 100mm
Turret middle (rear) cheek armor: 75mm
Turret rear armor: 50mm
@voytek .50 cal? Oh... now i understand
If for some reason you want to know the composition of steel, go here
@SPWithLizzie
@keiyronelleavgeek566
@RB107
@LunarEclipseSP
@DeeganWithABazooka
@RepublicofWrightIsles
@Schmoovebrain
@MIGFOXHOUND31BSM26
@GeneralCorpInc
@BOSSentinel
@Supersoli8
@NotRob119
@ReichRichDeutschYour
@AverageB1BLancerSimp
@Aeromax
currently have 35,000 units available for sale.
Price: $1,550,000 ~ 2,100,000
Package: comes with 2 months maintenanc
I haven't had time to finish the description yet.
Hey
Materials:
Kerrex.A10 - 12.5%
PS.SiCrMo65 - 31.25%
PS.ST52M - 31.25%
PS.SiCrMo65 - 25%
Front plate thickness: 150mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle + 50mm plate (PS.SiCrMo65)
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 200mm
Turret front (up) armor: 190mm at 30 degrees
Turret front (down) armor: 160mm at -60 degrees
Turret middle (front) armor: 110mm
Turret middle (rear) cheek armor: 80mm
Turret rear armor: 50mm
@BOSSentinel oh...
@BOSSentinel ?
@voytek Well, it happens.
T
T
If you want to use steel from AMFK, you can request permission.
@BOSSentinel What can you do, you have to somehow calculate the reduction
@Bugati87 Thanks for that and this time
Oh... That awesome
The percentages may differ from the steel marking, for example MK-A is the worst, that is, it has the minimum values from this table, and MK-C, on the contrary, has the maximum values
I officially hate muzzle brakes now
Tag-6
@SPWithLizzie
Tag-5
@RepublicOfWrightIsles
@Mitterbin
@notrob119
Tag-4
@BOSKnight
@MIGFOXHOUND31BSM26
@voytek
Tag-3
@Bugati87
@keiyronelleavgeek566
@BigheadEngineering
Tag-2
@RB107
@B1BLancer
@LunarEclipseSP
Tag-1
@deutschFELLA
@Schmoovebrain
@DeeganWithABazooka
here AMFK
@YourAverageB1BLancerSimp It weighs from 50 to 70 tons as I understand my A2 weighs 80 minimum
@YourAverageB1BLancerSimp Maybe I overstated the price for 1A2, but I'm not sure.
@YourAverageB1BLancerSimp It's not real, why the hell do I need my MBT if I can buy GMBT cheaper?
@BOSinitiate We will turn a blind eye to this
@YourAverageB1BLancerSimp Why the hell did I need to develop the MBT-70 then, and especially my own MBT? Actually, the characteristics of GAMBT are not bad, if I understand correctly
@B1BLancer $800,000??? Really?
Tag-4
@BOSKnight
@MIGFOXHOUND31BSM26
@voytek