The percentages may differ from the steel marking, for example MK-A is the worst, that is, it has the minimum values from this table, and MK-C, on the contrary, has the maximum values
@YourAverageB1BLancerSimp But it's still hard to watch when my new MBT is inferior in characteristics to the MBT from 1950, besides, my MBT costs as much as a small country, and this one costs only 800,000, besides, the engine that I installed on which I was betting is just a laughing stock compared to this 2300 horsepower monster...
@YourAverageB1BLancerSimp Why the hell did I need to develop the MBT-70 then, and especially my own MBT? Actually, the characteristics of GAMBT are not bad, if I understand correctly
Materials: PS.SiCrMo65 MK-C + 5~15mm of Kerrex.A10
Front plate thickness: 95mm+10mm at a 84 degree angle
Middle front plate thickness: 175mm+15mm at 68 degrees
Lower front plate thickness: 120mm+10mm at a 45 degree angle + 60mm plate
Upper side thickness: 85mm+10mm at 0 degrees
Lower side thickness: 70mm+5mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees
Upper rear thickness: 40mm+5mm at 10 degrees
Lower rear thickness: 50mm+5mm at 0 degrees
Hull roof armor: 35MM+5mm at 0 degrees
Hull floor armor: 35MM+5mm at 0 degrees
Gun mask: 240mm+15mm
Turret front (up) armor: 210mm+15mm at 30 degrees
Turret front (down) armor: 190mm+10mm at -60 degrees
Turret middle (front) armor: 125mm+10mm
Turret middle (rear) cheek armor: 95mm+5mm
Turret rear armor: 50mm+5mm
@BOSSentinel oh...
@BOSSentinel ?
@voytek Well, it happens.
T
T
If you want to use steel from AMFK, you can request permission.
@BOSSentinel What can you do, you have to somehow calculate the reduction
@Bugati87 Thanks for that and this time
Oh... That awesome
The percentages may differ from the steel marking, for example MK-A is the worst, that is, it has the minimum values from this table, and MK-C, on the contrary, has the maximum values
I officially hate muzzle brakes now
@Mitterbin hmmm
+1@Mitterbin Now stable after dropping the bomb
+1Tag-6
@SPWithLizzie
Tag-5
@RepublicOfWrightIsles
@Mitterbin
@notrob119
Tag-4
@BOSKnight
@MIGFOXHOUND31BSM26
@voytek
Tag-3
@Bugati87
@keiyronelleavgeek566
@BigheadEngineering
Tag-2
@RB107
@B1BLancer
@LunarEclipseSP
Tag-1
@deutschFELLA
@Schmoovebrain
@DeeganWithABazooka
here AMFK
@YourAverageB1BLancerSimp It weighs from 50 to 70 tons as I understand my A2 weighs 80 minimum
@YourAverageB1BLancerSimp But it's still hard to watch when my new MBT is inferior in characteristics to the MBT from 1950, besides, my MBT costs as much as a small country, and this one costs only 800,000, besides, the engine that I installed on which I was betting is just a laughing stock compared to this 2300 horsepower monster...
+1@YourAverageB1BLancerSimp Understand...
+1@YourAverageB1BLancerSimp When MBT can be bought for less than a fkn light tank
+1@YourAverageB1BLancerSimp It feels like I don't see any point in my projects.
+1@YourAverageB1BLancerSimp Maybe I overstated the price for 1A2, but I'm not sure.
@YourAverageB1BLancerSimp It's not real, why the hell do I need my MBT if I can buy GMBT cheaper?
Cool
+1@BOSinitiate We will turn a blind eye to this
@YourAverageB1BLancerSimp Why the hell did I need to develop the MBT-70 then, and especially my own MBT? Actually, the characteristics of GAMBT are not bad, if I understand correctly
@GeneralCorpInc Well, Idk, I asked a friend to make a logo (he can draw), but how did he do it?
+1If yes...
+1@Mitterbin Will he be able to compete with Löwenhart A2?
+1@B1BLancer $800,000??? Really?
@GeneralCorpInc Just two problems, great
+1@Mitterbin You already have enough, I understand.
+1@Mitterbin Don't you want to buy a couple of pieces? it's not for nothing that I made it...
+1@Mitterbin And this tank has the maximum number of guns.
+1@Mitterbin Finally I was able to make a normal description
+1Tag-6
+1@SPWithLizzie
Tag-5
+1@RepublicOfWrightIsles
@Mitterbin
@notrob119
Tag-4
@BOSKnight
@MIGFOXHOUND31BSM26
@voytek
Tag-3
@Bugati87
@keiyronelleavgeek566
@BigheadEngineering
Tag-2
@RB107
@B1BLancer
@LunarEclipseSP
Tag-1
@deutschFELLA
@Schmoovebrain
@DeeganWithABazooka
@GeneralCorpInc @BOSSentinel If I screwed up somewhere in the material part, I don’t know what I’ll do with myself
Materials:
PS.SiCrMo65:
Carbon (C): ~0.45-0.55%
Silicon (Si): ~1.0-1.5%
Chromium (Cr): ~1.8-2.2%
Molybdenum (Mo): ~0.4-0.6%
Manganese (Mn): ~0.8-1.2%
Nickel (Ni): ~0.3-0.5% (optional for crack resistance)
Remaining: Iron (Fe) - basis
Kerrex.A10:
Matrix: Reinforced composite structure based on silicate and fluoroplastic binders
Filler: Ceramics (Al₂O₃), layered Ti-TiB₂ with hexagonal interlayers (e.g. h-BN)
Layer: Viscous layer for energy dissipation (silica gel/rubber resin)
Materials: PS.SiCrMo65 MK-C + 5~15mm of Kerrex.A10
Front plate thickness: 95mm+10mm at a 84 degree angle
Middle front plate thickness: 175mm+15mm at 68 degrees
Lower front plate thickness: 120mm+10mm at a 45 degree angle + 60mm plate
Upper side thickness: 85mm+10mm at 0 degrees
Lower side thickness: 70mm+5mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees
Upper rear thickness: 40mm+5mm at 10 degrees
Lower rear thickness: 50mm+5mm at 0 degrees
Hull roof armor: 35MM+5mm at 0 degrees
Hull floor armor: 35MM+5mm at 0 degrees
Gun mask: 240mm+15mm
Turret front (up) armor: 210mm+15mm at 30 degrees
Turret front (down) armor: 190mm+10mm at -60 degrees
Turret middle (front) armor: 125mm+10mm
Turret middle (rear) cheek armor: 95mm+5mm
Turret rear armor: 50mm+5mm
currently have 15,000 units available for sale.
Price: $2,875,000 ~ 4,750,000
Package: comes with 2 months maintenanc
Cool