@BOSSentinel I'm just wondering why you didn't remind me about the automatic loader back when we were talking about Lowenhart, because we were discussing the hardware then and you weren't against the automatic loader if I worsened its characteristics. if you don't like that the automatic loader is falling into someone else's hands, you could give an ultimatum to leave the already sold and produced units alone and indicate whether I can use it automatic loader or I am prohibited from using them partially or completely (for example for the external market outside of Molokai or Yurpania)
And I'm still haunted by this fucking 2300hp engine. I just checked whether the most powerful tank engine in the 21st century is ГТД-1250(1250hp) or GD883 (1500hp) is this miracle from the 1950s AT LEAST 800 hp MORE POWERFUL considering that it is not gas turbine or hybrid
@BOSSentinel And armor this is not some composite with a shitload of materials, but two types of steel and ceramics that, God willing, will survive the rain
@BOSSentinel 2300 hp, BLYAT! WHEN ACCORDING TO THE SETTING IT SHOULD BE AT LEAST 1000 AND EVEN THAT'S ALREADY A LOT THE GAMBT VLD IS A LITTLE WORSE THAN MY TBMP BUT THE ENGINE FUCKING DRAWS POWER FROM ANOTHER UNIVERSE SO ALSO IT COSTS TWICE LESS
@BOSSentinel According to calculations, the engine allows and especially the MBT-70 propeller (if you haven't changed the engine) that's 2300 horsepower and those 80 tons or whatever just evaporate
@BOSSentinel If according to RP, then development began in 1950, but slowly, since 1954, after receiving funds from Yurpania, development proceeded much faster and in 1955 the first tank with an AL from AMFK was released.
Front plate thickness: 135mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 100mm
Turret front (up) armor: 90mm at 30 degrees
Turret front (down) armor: 150mm at 15 degrees
Turret middle (down) armor: 100mm at 15 degrees
Turret middle (up) armor: 75mm at 30 degrees
Turret rear armor: 50mm at 0 degrees
Turret roof armor: 40mm at 0 degrees
(A1) currently have 20,000 units available for sale.
Price: $1,600,000 ~ 2,000,000
Package: comes with 4 months maintenanc
(A2) currently have 15,000 units available for sale.
Price: $1,700,000 ~ 2,150,000
Package: comes with 4 months maintenanc
@BOSSentinel Ahem ahem we literally discussed this with you when we were analyzing Löwenhart
+1@BOSSentinel I'm just wondering why you didn't remind me about the automatic loader back when we were talking about Lowenhart, because we were discussing the hardware then and you weren't against the automatic loader if I worsened its characteristics. if you don't like that the automatic loader is falling into someone else's hands, you could give an ultimatum to leave the already sold and produced units alone and indicate whether I can use it automatic loader or I am prohibited from using them partially or completely (for example for the external market outside of Molokai or Yurpania)
I'll go make myself some tea.
@SchmooveBrain For example, me
@SchmooveBrain Well, I already understood it myself... it’s just morning for me
+1@BOSSentinel Do you still think that 135mm of armor is a big problem in realism?
And I'm still haunted by this fucking 2300hp engine. I just checked whether the most powerful tank engine in the 21st century is ГТД-1250(1250hp) or GD883 (1500hp) is this miracle from the 1950s AT LEAST 800 hp MORE POWERFUL considering that it is not gas turbine or hybrid
@BOSSentinel Yes, the steel may be good, but it is just a solid piece of steel that can be pierced with any HEAT.
@BOSSentinel And armor this is not some composite with a shitload of materials, but two types of steel and ceramics that, God willing, will survive the rain
@BOSSentinel 2300 hp, BLYAT! WHEN ACCORDING TO THE SETTING IT SHOULD BE AT LEAST 1000 AND EVEN THAT'S ALREADY A LOT THE GAMBT VLD IS A LITTLE WORSE THAN MY TBMP BUT THE ENGINE FUCKING DRAWS POWER FROM ANOTHER UNIVERSE SO ALSO IT COSTS TWICE LESS
@BOSSentinel According to calculations, the engine allows and especially the MBT-70 propeller (if you haven't changed the engine) that's 2300 horsepower and those 80 tons or whatever just evaporate
Well, it doesn't really change things, but oh well.
@BOSSentinel 1958 isn't it?
@BOSSentinel If necessary, I will simply lower the accuracy and reliability so that it meets your requirements.
@BOSSentinel Hull from the H-IFV
@BOSSentinel That's why you didn't tell me about this before...
@BOSSentinel Should I now remake all the tanks/artillery's/and other vehicles? I'm not doing so well as it is, at least give me an automatic loader
And yes, AMFK was formed not in 1955, but back in the 1890s, but since the 1940s it has acquired its current name.
@BOSSentinel If according to RP, then development began in 1950, but slowly, since 1954, after receiving funds from Yurpania, development proceeded much faster and in 1955 the first tank with an AL from AMFK was released.
@BOSSentinel I started using them in 1955.
@BOSSentinel Don't ask...
If you want a perma tag, go here
If you want to know about the classification, go here
@Bugati87
@SPWithLizzie
@keiyronelleavgeek566
@RB107
@LunarEclipseSP
@DeeganWithABazooka
@RepublicofWrightIsles
@Schmoovebrain
@MIGFOXHOUND31BSM26
@GeneralCorpInc
@BOSSentinel
@Supersoli8
@NotRob119
@ReichRichDeutschYour
@YourAverageB1BLancerSimp
@Aeromax
@Mitterbin
+1@Voytek
@BigHeadEngineering
Materials:
Kerrex.A10 - 12.5%
PS.SiCrMo65 - 31.25%
PS.ST52M - 31.25%
PS.SiCrMo65 - 25%
Front plate thickness: 135mm at a 70 degree angle
Lower front plate thickness: 100mm at a 45 degree angle
Upper side thickness: 85mm at 0 degrees
Lower side thickness: 75mm at 0 degrees
Side armour plates thickness: 20mm at 0 degrees (PS.SiCrMo65)
Rear thickness: 45mm at 10 degrees
Hull roof armor: 40mm at 0 degrees
Hull floor armor: 40mm at 0 degrees
Gun mask: 100mm
Turret front (up) armor: 90mm at 30 degrees
Turret front (down) armor: 150mm at 15 degrees
Turret middle (down) armor: 100mm at 15 degrees
Turret middle (up) armor: 75mm at 30 degrees
Turret rear armor: 50mm at 0 degrees
Turret roof armor: 40mm at 0 degrees
(A1) currently have 20,000 units available for sale.
Price: $1,600,000 ~ 2,000,000
Package: comes with 4 months maintenanc
(A2) currently have 15,000 units available for sale.
Price: $1,700,000 ~ 2,150,000
Package: comes with 4 months maintenanc
If for some reason you want to know the composition of steel, go here
Something interesting
@Mitterbin I will additionally make Eisenwind II then and LRT/MBgT
+1@Bugati87 Oh... Sorry
@SPWithLizzie
@keiyronelleavgeek566
@RB107
@LunarEclipseSP
@DeeganWithABazooka
@RepublicofWrightIsles
@Schmoovebrain
@MIGFOXHOUND31BSM26
@GeneralCorpInc
@BOSSentinel
@Supersoli8
@NotRob119
@ReichRichDeutschYour
@YourAverageB1BLancerSimp
@Aeromax
@Mitterbin
+1@Voytek
@BigHeadEngineering
@Mitterbin oke
+1So wait, was I wrong by a year?
+1@Mitterbin I have a question why 7.9mm machine guns, I don't remember this caliber was widely used by the Soviets (and still is) 7.62x54R mm
+2@BOSSentinel The question is why bother with developments when you can buy new tanks that have already been created
@BOSSentinel That is XM2A4 On my case it is also competitor for the new MBT of Yourpania?
[SGW-RP] tag
@GeneralCorpInc
@Deeganwithabazooka
@BOSSentinel
@Mitterbin I asked the GCI, he said no problem.
+2Material: RHn-Stahl
:
Front plate thickness: 15mm at 0 degrees
Middle front plate thickness: 15mm at 79 degrees
Lower front plate thickness: 15mm at 30 degrees
Side thickness: 15mm at 0 degrees
Rear thickness: 15mm at 0 degrees
Hull roof armor: 10mm at 0 degrees
Hull floor armor: 5mm at 0 degrees
:
Gun mask: 15mm
Turret front (up) armor: 15mm at 60 degrees
Turret front (down) armor: 15mm at 0 degrees
Turret middle armor: 15mm at 0 degrees
Turret rear armor: 15mm at 0 degrees
Turret roof armor: 10mm at 0 degrees