I don’t know now I can’t see them! I’ve deleted and reinstalled and the list works again, but the editing section hasn’t. I’ll go check as you have described. Cheers! @jamesPLANESii
This is beautiful. I owned a gold TC Cortina, it was my third ever car. It was an iron 200ci motor and a 3 speed borg transmission. It was a really fast car and I’d had it over 100mph a lot. Brakes were pretty terrible though. I remember one night we did a monsterous burn out in it. Good times.
Yeah and it’s pretty weird having vtol and throttle, I tried changing it all to pitch so you didn’t have to try and set each motors to turn or jump or whatever. It’s really heavy too. It looks really cool, there’s just a bit of sorting needed.
This is really cool! It’s a sweet car for sure, but I really wish the throttle was pitch rather than VTOL, heaps better because it’s RTC not just stuck in one spot. I was trying and it kept saying there is no motor.
You’ll never have that’s flying, there is too much weight over the front. You’re better to have one wing in the middle of the fuselage and then one under the fuselage, so you don’t need to add all that framework on the side.
This looks really good. I kinda get Porsche Carrera vibes from it.
I changed a few things on mine, and may make a few more changes/mods and upload my version if I do anything radical.
First off I changed over to street tyres. Next I changed the engines around so that the rear wheels each had its own engine, and the second set of front wheels shared an engine.
I tweaked the steering so the rear wheels had zero movement, and the front axle turns 30 degrees, the second axle turns 15 degrees. I haven’t changed any traction settings yet but I may.
The car is much faster now, especially off the line, where I felt it was lacking before.
Amazing design though, it’s probably my favourite design I’ve seen.
Just like a real hovercraft!
* This is difficult but I’ll get it.
* Oh ok I think I have it!
* I am a driving God!!!
* Uh-oh, but I saved it! I’m the best!!
* Crash, bang, boom, explosions, firey death flames, broken bones, shattered pride.
You have to fly this opposite to everything else. Push left stick forward for lift and pull back to descend. It took me a minute to figure that out.
It’s really really tricky in flight too, because you’re wired to fly it normally as you do everything else and you end up crashing because you have to think about what you’re doing, rather than working naturally.
I thought the wings would be foldable, but it doesn’t seem like they are? That’s a shame, it would look cool all close in and since the engine provides most lift, it would be ok to fly I think.
It takes off at about 80kph but it would lift off quicker if you could hold a brake until the motor revs up. I’ll try changing the throttle to flaps so you can hold down for brake and rev the motor up at the same time.
This is pretty cool. I switched it up a bit, I made the front two axles steering and the back two steer the opposite way so it’s 4 wheel steer. I took 2 jets off and made the back two switchable so you can use the Petrol motors and switch to the jets for a boost.
This is really cool, it’s similar to the articulated truck I built. I think you’ll find that the cabs need to be a little further apart though as when you turn the wheels bind up and you crash. I just use 2 square blocks on each cab and mounted the swivel to them.
Cool car, but a Boss motor isn’t a flathead. Flatheads started in 1932 in the A model and by the early 50’s they were replaced and by the Mustang they were boat anchors, Mustangs used the Windsor, then Cleveland V8 engines, or in the Boss case, a Windsor bottom end which was lighter and had a narrower V angle, and Cleveland heads, which have massive ports and valves.
No worries, I love Ferrari and the 312T so it was fun! Also if you change the rear tyre size to 2.0 it seems a lot better, I forget if I did it on this one or not. @Mobius1Cyka
Uploaded a mostly fixed version. I don’t have access to the correct parts as I’m on mobile however I would just replace the 2 blocks on the front wheels with one complete axle so they’re perfectly aligned.
I think the issue is because of the taper on the front nose cone, one side will always be 1/2 a square unaligned with the other side. As I said, a complete axle would cure that.
Ok so I was able to find a few things.
1. When I clicked mirror R side to L side, both wheels on the L side detached. I’m not sure if that is anything related, but it happened.
I was able to get the car to drive straight. I did several things that didn’t help first, like change wheel sizes, traction amounts, engine/wheel directions, horsepower, a number of things. Nothing.
The way I cured it (and unfortunately I only have mobile so it looks rubbish, that’s why I don’t want to upload it) was to remove the rear shocks and attachments and use one square block on the body and connected the wheels to that. It worked straight away. I don’t know why, but that cured the issue 100% even with a 600hp motor.
There is only one elevator on the tail, you need one on the right side too.
You need a heap more lift and control surfaces. I’m replacing the rear section with some wings to see how it goes.
This is really cool. It’s very futuristic looking and good to fly. Well done!
I don’t know now I can’t see them! I’ve deleted and reinstalled and the list works again, but the editing section hasn’t. I’ll go check as you have described. Cheers! @jamesPLANESii
This is beautiful. I owned a gold TC Cortina, it was my third ever car. It was an iron 200ci motor and a 3 speed borg transmission. It was a really fast car and I’d had it over 100mph a lot. Brakes were pretty terrible though. I remember one night we did a monsterous burn out in it. Good times.
Yes. Very much yes. This is a beast.
Yeah and it’s pretty weird having vtol and throttle, I tried changing it all to pitch so you didn’t have to try and set each motors to turn or jump or whatever. It’s really heavy too. It looks really cool, there’s just a bit of sorting needed.
Damn this is so slow!
Seriously awesome plane!
This is really cool! It’s a sweet car for sure, but I really wish the throttle was pitch rather than VTOL, heaps better because it’s RTC not just stuck in one spot. I was trying and it kept saying there is no motor.
No worries homey. I like the biplanes, they’re sweet. @Fresavacado55
You’ll never have that’s flying, there is too much weight over the front. You’re better to have one wing in the middle of the fuselage and then one under the fuselage, so you don’t need to add all that framework on the side.
This is stunning. Absolutely incredible detail and accuracy.
Ok man I’ll give it a go. @Luckycolt
This car is scaled beautifully. The lines are immediately recognisable and the proportions are perfect. Great job.
I don’t know what you mean? @AwesomeAir
Mine comes from an old employee code it’s the letter A for the section I worked in and 3 letters from my first and last name. @AwesomeAir
The best hot rod and close to one of the best cars in the whole game. Awesome work, it’s really realistic and runs beautifully.
How the heck do you use it?
Thanks man! You did great with your buggy @Engineeringbadger
Wow, this is stunning.
I made 82,000m or near enough to. Definitely high 81,000
Thanks everyone, I’ll try it out!
This looks really good. I kinda get Porsche Carrera vibes from it.
I changed a few things on mine, and may make a few more changes/mods and upload my version if I do anything radical.
First off I changed over to street tyres. Next I changed the engines around so that the rear wheels each had its own engine, and the second set of front wheels shared an engine.
I tweaked the steering so the rear wheels had zero movement, and the front axle turns 30 degrees, the second axle turns 15 degrees. I haven’t changed any traction settings yet but I may.
The car is much faster now, especially off the line, where I felt it was lacking before.
Amazing design though, it’s probably my favourite design I’ve seen.
This is gorgeous. I’m a huge Boeing fan and it’s a shame this design was shelved. Thanks so much for recreating it.
How the hell do you fly it?
What is wrong with it?
100,000% better omg it’s great
Just like a real hovercraft!
* This is difficult but I’ll get it.
* Oh ok I think I have it!
* I am a driving God!!!
* Uh-oh, but I saved it! I’m the best!!
* Crash, bang, boom, explosions, firey death flames, broken bones, shattered pride.
You have to fly this opposite to everything else. Push left stick forward for lift and pull back to descend. It took me a minute to figure that out.
It’s really really tricky in flight too, because you’re wired to fly it normally as you do everything else and you end up crashing because you have to think about what you’re doing, rather than working naturally.
I thought the wings would be foldable, but it doesn’t seem like they are? That’s a shame, it would look cool all close in and since the engine provides most lift, it would be ok to fly I think.
Yeah man sure, I’ll do it shortly. @Cheese3
Damn it’s impossible to fly.
There is just no lift at all
It takes off at about 80kph but it would lift off quicker if you could hold a brake until the motor revs up. I’ll try changing the throttle to flaps so you can hold down for brake and rev the motor up at the same time.
This is pretty cool. I switched it up a bit, I made the front two axles steering and the back two steer the opposite way so it’s 4 wheel steer. I took 2 jets off and made the back two switchable so you can use the Petrol motors and switch to the jets for a boost.
Wow, this is stunning!
This is really cool, it’s similar to the articulated truck I built. I think you’ll find that the cabs need to be a little further apart though as when you turn the wheels bind up and you crash. I just use 2 square blocks on each cab and mounted the swivel to them.
Haha sweet! I’ll check it out @Love0police
It’s just crazy lol @BlueBell
Cool car, but a Boss motor isn’t a flathead. Flatheads started in 1932 in the A model and by the early 50’s they were replaced and by the Mustang they were boat anchors, Mustangs used the Windsor, then Cleveland V8 engines, or in the Boss case, a Windsor bottom end which was lighter and had a narrower V angle, and Cleveland heads, which have massive ports and valves.
This plane is beautiful! It flies so nicely too. Very very nice. One of my favourite passenger liners on here. Well done!
One of the best F1 cars, driven by the best of the best ever drivers, my hero, Ayrton Senna. RIP Ayrton.
No worries, I love Ferrari and the 312T so it was fun! Also if you change the rear tyre size to 2.0 it seems a lot better, I forget if I did it on this one or not. @Mobius1Cyka
Uploaded a mostly fixed version. I don’t have access to the correct parts as I’m on mobile however I would just replace the 2 blocks on the front wheels with one complete axle so they’re perfectly aligned.
I think the issue is because of the taper on the front nose cone, one side will always be 1/2 a square unaligned with the other side. As I said, a complete axle would cure that.
Ok so I was able to find a few things.
1. When I clicked mirror R side to L side, both wheels on the L side detached. I’m not sure if that is anything related, but it happened.
I was able to get the car to drive straight. I did several things that didn’t help first, like change wheel sizes, traction amounts, engine/wheel directions, horsepower, a number of things. Nothing.
The way I cured it (and unfortunately I only have mobile so it looks rubbish, that’s why I don’t want to upload it) was to remove the rear shocks and attachments and use one square block on the body and connected the wheels to that. It worked straight away. I don’t know why, but that cured the issue 100% even with a 600hp motor.
Wow, this is a stunning plane
Thanks heaps! That means a lot. @AfertAppler
This thing is a beast!