Move the tail way back and check center of mass is further forward than the center of lift (check with the button that looks like 3 circles in a horizontal line on a triangle)
@mrxml Try to get your plane in a high contrast background before taking a screenshot (i.e. snowstone if you have a dark plane and the ocean if you have a light one).
In the designer, click on the View menu (looks like an eye) and from there, click on the blueprint button. Click “Open Image”, and open your screenshot. The screenshot should appear in the background behind the plane, however note that if you move the angle at all the blueprint will disappear. Move the image so it is not in front of the plane. From there, Press Share Aircraft and press take screenshot. Carefully pan so that the image takes up the entirety of your screen and press done. You should have a custom screenshot.
@Ashdenpaw1 Take your photo and get it into an image url using a website (I use Gifyu), and in your bio description, type “”. When you save the change and exit the description editor, the image should show up.
@mrpuzzles unfortunately, I am not at a game capable device right now so I cannot see the plane perform however a general tip is to have longer wings. If you don’t like how the longer wings look, use XML or Fine Tuner to scale it down by 0.001 in all dimensions, which will make them almost impossible to see but still provide that maneuverability. However, make sure get it to how you like it before scaling down, as it is very hard to edit it when it is very small.
You can try making a copy that has the control surfaces edited so that no inputs can affect them except trim, and place it in the same build area as the OG build, in the location you want it to be in formation (probably on front of and to the side of the OG build). Then copy it again and place it also in formation. From there, spawn in the air, go full throttle and trim out so the formation levels off, and when you go to break away using pitch and roll, only one plane should move. Then, you can get the screenshot.
I use an iOS IPad, and the joysticks are easy to control. Though you can see what device some uses by going to any plane they made and going to specifications.
Cool! Very fast! However, next time make sure to add a description with all activation groups and what they do listed, as we do not know anything about your plane. Also, get a screenshot with the entire plane.
If I don’t know what to build, I like to build something that I haven’t built before, or look for an active challenge. If you want something specific, try a biplane.
@AeroTactical fixed the bomb
T
@MrSilverWolf
@Onat67
@DeeganishCountryball @mosquitowithamachinegun And I’ll do it again
@mosquitowithamachinegun
Move the tail way back and check center of mass is further forward than the center of lift (check with the button that looks like 3 circles in a horizontal line on a triangle)
Use image embedding and put them in the description
My Digital Avionics Post. It makes sense tbh, it has a good thumbnail and many found it useful.
Nice plane! Though make sure not to mirror the entire aircraft if you have a detailed cockpit, just mirror individual parts.
@LunarEclipseSP
Grave Robbin’
Make sure to add the VR tag
@Imbadatbuildingplens yes
@TheMouse I just wanted a link to his profile
@joeysellers
Those are cool looking rocket pods.
@mrxml Try to get your plane in a high contrast background before taking a screenshot (i.e. snowstone if you have a dark plane and the ocean if you have a light one).
@BaconEggs how?
Can you be more specific?
Build a WW2 plane
T
@TheMouse
Can you be more specific?
That’s really your decision to make, so feel free to do differently, but I would wait for SP2.
Try moving your center of mass forward
@MIGFOXHOUND31BSM26 just since a rapier is similar to a saber
Maybe the rapier?
@TheHamburgerCorperation Thank you!
In the designer, click on the View menu (looks like an eye) and from there, click on the blueprint button. Click “Open Image”, and open your screenshot. The screenshot should appear in the background behind the plane, however note that if you move the angle at all the blueprint will disappear. Move the image so it is not in front of the plane. From there, Press Share Aircraft and press take screenshot. Carefully pan so that the image takes up the entirety of your screen and press done. You should have a custom screenshot.
@theNoobCountry2withM1911 pretty sure that was a certified autocorrect moment
@Ashdenpaw1 Take your photo and get it into an image url using a website (I use Gifyu), and in your bio description, type “”. When you save the change and exit the description editor, the image should show up.
@TheMouse
@TheMouse I was just testing with unlisted posts
@mrpuzzles unfortunately, I am not at a game capable device right now so I cannot see the plane perform however a general tip is to have longer wings. If you don’t like how the longer wings look, use XML or Fine Tuner to scale it down by 0.001 in all dimensions, which will make them almost impossible to see but still provide that maneuverability. However, make sure get it to how you like it before scaling down, as it is very hard to edit it when it is very small.
@Akashenik Thanks!
P.S. if you want the plane that is breaking away to be releasing flares, remove the counter measure dispensers from the copies.
You can try making a copy that has the control surfaces edited so that no inputs can affect them except trim, and place it in the same build area as the OG build, in the location you want it to be in formation (probably on front of and to the side of the OG build). Then copy it again and place it also in formation. From there, spawn in the air, go full throttle and trim out so the formation levels off, and when you go to break away using pitch and roll, only one plane should move. Then, you can get the screenshot.
I use an iOS IPad, and the joysticks are easy to control. Though you can see what device some uses by going to any plane they made and going to specifications.
Maybe because it can redirect to an app (SimplePlanes) but I’m not sure.
Cool! Very fast! However, next time make sure to add a description with all activation groups and what they do listed, as we do not know anything about your plane. Also, get a screenshot with the entire plane.
This is my first time using funky trees.
@Mousewithamachinegun122 How do you make this hover?
If I don’t know what to build, I like to build something that I haven’t built before, or look for an active challenge. If you want something specific, try a biplane.
Grave robbing
@Mousewithamachinegun123 Yes, and if they think it satisfies the requirements, they will curate it
Annoy the deceased
@Mousewithamachinegun123 oh yeah, make sure to give it the VR tag or it can’t get curated
@Tortoise500000 one tip would be to add tags, especially the VR tag so it can get curated (allows people to use it when playing with a VR headset)
Both this and the Marader are really good!