Profile image

Aviatik B.1

1,794 StraitAircraft  9 days ago

Aviatik B.1

It's Aviatik not Aviatak or Avitak

reconnaissance on the eastern front


A German two-seater recon plane built by Aviatik. It is actually aviatak's first original design, since the have been copying french planes until then.

Austria, Turkey and even Paraguay operated this plane.


interesting fact, this plane was actually used extensively in africa as a recon plane, and was the actual reason I wanted to build it. The Livery is a eastern front variant.


Specifications

General characteristics

Crew: 2
Length: 7.93 m (26 ft 0 in)
Wingspan: 14 m (45 ft 11 in)
Height: 3.05 m (10 ft 0 in)
Empty weight: 668 kg (1,473 lb)
Gross weight: 1,090 kg (2,403 lb)
Powerplant: × Mercedes D.I 6-cylinder liquid-cooled inline engine 105 PS (103.56 hp; 77.23 kW)
Propellers: 2-bladed fixed-pitch propeller
Performance

Maximum speed: 100 km/h (62 mph, 54 kn)
Cruise speed: 90 km/h (56 mph, 49 kn)
Range: 800 km (500 mi, 430 nmi)
Time to altitude: 1,000 m (3,300 ft) in 15 minutes

About 580 were made, which is strange, since such a widely produced aircraft has almost no presence on this website except for some posts mentioning it.

It's a first of its kind on the platform!

Enjoy, it flies just under 120km/h

Take of with rudder left, it tends to veer left on the runway...

Thanks again!

Spotlights

General Characteristics

  • Created On Android
  • Wingspan 27.5ft (8.4m)
  • Length 15.6ft (4.8m)
  • Height 5.6ft (1.7m)
  • Empty Weight 715lbs (324kg)
  • Loaded Weight 921lbs (417kg)

Performance

  • Horse Power/Weight Ratio 0.656
  • Wing Loading 6.2lbs/ft2 (30.2kg/m2)
  • Wing Area 149.0ft2 (13.8m2)
  • Drag Points 1664

Parts

  • Number of Parts 78
  • Control Surfaces 11
  • Performance Cost 335
  • Log in to leave a comment
  • Profile image

    @StraitAircraft
    Understood.
    Also, Aviatik, not Aviatak.

    Pinned 8 days ago
  • Profile image

    @ThomasRoderick I think I need glasses...

    +1 8 days ago
  • Profile image

    @ThomasRoderick fixed!
    It's quite the unfamiliar company...
    I'm working on a dornier next, maybye I won't spell it wrong?

    +1 8 days ago
  • Profile image

    @ThomasRoderick AHHHH
    thanks so much for pointing out! And call me Percy, calling me strait sounds wierd

    +1 8 days ago