Profile image

50Hour Built X30401

4,500 xfight  4.1 years ago

The following is from machine translation

Because of the influence of covid-19 virus, I can only stay at home. I accidentally found a design drawn in CAD last year, corrected some design errors, and made some modifications to simplify the parts. Finally, simpleplanes was built. Because it took only 50 hours to build, there must be some imperfections, I hope to understand.

It is temporarily named ocean flame, with internal design number of x30401, 198m long, 27.5m wide, draft of 5.5m, and standard drainage capacity of about 14000t. It is equipped with two triple 254MM main guns, four dual 130mm auxiliary guns, 20 dual 57mm air defense guns, two 30 tube 14 inch rockets, two triple 533mm torpedo launchers and two seaplanes. Four speedboats.

I sum it up as a patrol, which is expected to be completed in 1946 and 1948. The main task is to destroy the traffic lines and support the land fire. It is assumed that the main gun has a similar ultimate range as Mk7, and the rocket has an automatic loading device under the deck, which can launch he bombs and small mine dispersers.

It is destined to be a warship of gun to missile transition. The position of the rocket has reserved space for the air defense missiles that may be equipped in the future, or equipped with a set of early long-range shipborne air defense system at the front and rear decks. The flight deck can also be equipped with a rotary anti-ship missile launcher. And what I'm talking about now is the appearance of its successor model x30402, which is being drawn one by one in my CAD.

Control group

AG1 front main gun

Ag2 rear main gun

Ag3 VTOL up left auxiliary gun group, VTOL down right auxiliary gun group

AG4 VTOL up left torpedo rotation, Trim up boat throttle ,roll boat turn.

Ag5 antiaircraft gun group

AG6 VTOL up right torpedo rotates, Trim up boat throttle ,roll boat turn.
Ag7 VTOL up unfolds the wing, VTOL down the crane rotates, brake long press release sling

Throttle of trim up seaplane, boom of trim down crane retracted and released,

Roll and prime control seaplane

AG8 rocket rotation

Landinggear magnet works

camera

1 front main gun range finder angle of view

2 range finder angle of rear main gun

Angle of view of 3 front rocket range finder

4 range finder angle of right auxiliary gun

5 range finder angle of left auxiliary gun

6 outside boat surround camera

7 inside boat surround camera

8 seaplane surround camera

Matters needing attention

  1. If the seaplane wants to be lifted, the magnet must contact the painted part on the upper part of the cockpit to lift smoothly.It may be difficult. Try more and you will succeed.

  1. When recovering seaplane and small boat, it is necessary to let the head hit the ship's side, and turn up the throttle (no more than 15% for seaplane), otherwise it is easy to shake.

  2. The rocket can only shoot when it is turned to 90 °.

4.After entering the game, be sure to put down the landing gear, or the cable will be easily torn.

5.All the boats, seaplanes and cranes on the left side are just furnishings. The maneuverable ones are on the right side.

Finally, I hope you like it and up my design.

Spotlights

General Characteristics

  • Created On Windows
  • Wingspan 90.2ft (27.5m)
  • Length 649.5ft (198.0m)
  • Height 177.0ft (54.0m)
  • Empty Weight 280,813lbs (127,375kg)
  • Loaded Weight 320,203lbs (145,242kg)

Performance

  • Power/Weight Ratio 0.063
  • Horse Power/Weight Ratio 0.012
  • Wing Loading 329.8lbs/ft2 (1,610.2kg/m2)
  • Wing Area 970.9ft2 (90.2m2)
  • Drag Points 529802

Parts

  • Number of Parts 2671
  • Control Surfaces 6
  • Performance Cost 8,924
  • Log in to leave a comment
  • Profile image
    4,500 xfight

    @Quec thanks,i will add now

    +1 4.1 years ago
  • Profile image
    14.0k Quec

    Remember to tag your builds, helps people find it :)

    +1 4.1 years ago
  • Profile image
    4,500 xfight

    由于COVID-19病毒的影响,只能呆在家,无意间发现了去年在CAD里绘制的一个设计,修正了部分设计错误,为了精简零件做了一定的改造,终于simpleplanes建造了出来。因为建造只花了50个小时,所以肯定有不完善的地方,希望理解。

    暂时命名为Ocean Flame,内部设计编号X30401,长198m,宽27.5m,吃水5.5m,标准排水量约14000吨。装备三联254mm主炮2座,双联130mm副炮4座,双联57mm防空炮20座,30管14英寸火箭炮两座,三联533mm鱼雷发射器两座,水上飞机两架。快艇4艘。
    我将它归纳为重巡,预计设计于1946年,1948年完成建造,主要任务是远洋破坏交通线和对陆火力支援。设想中,主炮有着和MK7相似的极限射程,火箭炮有自动装填设备在甲板下,可以发射HE弹和小型水雷散部器。
    它注定是艘火炮向导弹的过渡的军舰。火箭炮位置为未来可能装备的防空导弹预留了空间,或者在前后甲板各装备一套早期远程舰载防空系统。飞行甲板也可以装备旋转式反舰导弹发射装置。而我现在所说的,正式它的后继型号x30402的样子,它正在我的CAD里一笔一笔的被画出来。

    操纵组
    AG1 前主炮
    AG2 后主炮
    AG3 VTOL UP 左副炮组,VTOL DOWN 右副炮组
    AG4 VTOL UP 左鱼雷旋转,释放外侧小艇,Trim UP 小艇油门
    AG5 防空炮组
    AG6 VTOL UP 右鱼雷旋转,释放内侧小艇,Trim UP 小艇油门
    AG7 VTOL UP 展开机翼,VTOL DOWN 吊车旋转 ,Brake长按 释放吊绳
    Trim UP 水上飞机油门,Trim DOWN 吊车吊臂收放,
    ROLL 和 PRITCH 控制水上飞机
    AG8 火箭炮旋转
    LandingGear 磁铁工作

    相机
    1 前主炮测距仪视角
    2 后主炮测距仪视角
    3 前火箭炮测距仪视角
    4 右侧副炮测距仪视角
    5 左侧副炮测距仪视角
    6 外侧小艇环绕相机
    7 内侧小艇环绕相机
    8 水上飞机环绕相机

    注意事项
    1 水上飞机若想吊运,必须人磁铁接触座舱上部涂色部分才会平稳吊起。可能有些困难,多尝试几次就会成功的。

    2水上飞机和小艇回收时,必须要让头部撞击船舷,并把油门开大(水上飞机不要超过15%),否则容易晃动
    3火箭炮只有转到90°才能射击
    4进入游戏后,一定要收起起落架,否则缆绳容易被扯断
    5所有左侧的小艇,水上飞机和吊车只是摆设,可操控的都在右侧

    最后,希望你喜欢它,并UP我的作品。

    +1 4.1 years ago
  • Profile image

    Sofa

    +1 4.1 years ago