Mini Plane collection series. . Mini MIG-23 Flogger. .
1. Power up.
2. Move rotator to 2nd last arrow or slightly higher.
3. After lift off, retract gear.
4. Move rotator to a few step below middle arrow.
5. Move trim up to 1st or middle arrow to swept wings. When wing swept fully backward, nose tend to dip, so becareful to control rotator/elevator when swapping wing at low level. .
6. Press '1' to deploy drag chute. .
Have a nice flight. .
Specifications
General Characteristics
- Successors 1 airplane(s) +14 bonus
- Created On Windows
- Wingspan 21.7ft (6.6m)
- Length 27.3ft (8.3m)
- Height 8.2ft (2.5m)
- Empty Weight 9,686lbs (4,393kg)
- Loaded Weight 12,344lbs (5,599kg)
Performance
- Power/Weight Ratio 2.73
- Wing Loading 42.4lbs/ft2 (207.1kg/m2)
- Wing Area 291.0ft2 (27.0m2)
- Drag Points 1721
Parts
- Number of Parts 80
- Control Surfaces 5
- Performance Cost 426
@UnloadedRex
No apology necessary. . :). I learned quite alot from people like you and the rest in here. Thanks again for your input. Appreciate it very much. . :). Will check out your modified version of Mig-23.
Sorry for bothering you with all these posts, I just like what you post and wanted to see if I could help at all lol
https://www.simpleplanes.com/a/T1y03g/Mini-Mig-23a
@blindspot61 I messed around with it a little bit in a post I made, it gets rid of the all moving tail and uses control surfaces instead
@UnloadedRex
The last time I tried setting the input of the rotator as pitch ('S') & ('W') to control the elevator/horizontal stabilizer, I found that when I roll and pitch at the same time, I 'lost' control of the plane. It happens to a couple of plane when I tried that. (Tried that on my mini F-14 and later on another plane just to confirm if there's a problem or due to my design/creation). When I remove such setting and use what I am doing now, it was OK. Not sure if its a bug or my pc problem. So, I decided not to use that setting.
As for the tagging, thank you for the info. Honestly, there are still many options available that I don't know how to use them. . XD. . And thank you for upvoting. . Appreciate it.
Also you should set up tags on these posts so that they get more attention :)
Have you considered setting the rotators on the rear to pitch so that pitch controls the stabilators/stabilizers?