From Mokker to you
After seeing Raphaelis Defense, and their RDF Tigershark, Bell Lands decided to create a third generation fighter of their very own. Their first thought was to use two aircraft, one from Merikan, and one from Detrinita, but Detrinita's design was chosen to be the sole fighter, as there was extensive research for the design, some even dating back to 1931!
We put together the plane, using the research as our basis, and what we got is nothing short of perfection
Listing off some of its abilities:
•Supermaneuverability, even without thrust vectoring, mainly because of the variable sweep Delta wings (a one-up on the tigershark).
•Lightweight weaponry, primarily the Mokker D-Mk.8, a light, multirole missile. ([{Just the Ace combat MSL😭}])
•A lightweight and small airframe in general, this thing weighs only around half as much as the Tigershark
•Short Takeoff And Landing capabilities, especially the Short Takeoff!
•A wide tracking cone for it's radar, in exchange for some range
•A 20mm autocannon, with a 30 round/second fire rate
This aircraft is available for export to any nation, and it's one of the cheaper planes in the market, so buy away!
Specifications
Spotlights
- avDude4 4 months ago
General Characteristics
- Created On Android
- Wingspan 43.5ft (13.3m)
- Length 57.3ft (17.5m)
- Height 14.4ft (4.4m)
- Empty Weight 18,355lbs (8,325kg)
- Loaded Weight 28,013lbs (12,706kg)
Performance
- Power/Weight Ratio 7.942
- Wing Loading 36.9lbs/ft2 (180.1kg/m2)
- Wing Area 759.3ft2 (70.5m2)
- Drag Points 7012
Parts
- Number of Parts 209
- Control Surfaces 5
- Performance Cost 1,276
He geen
@SPWithLizzie where
@RepublicofWrightIsles
No, the S-variant
This?
@SPWithLizzie the auto loader. It only holds 3 Munitions, and 3 casings. Think of the leclerc and T-90 autoloader combined. The tank only carries around 20 Shells in total. But, it can fire 100mm APFSDS. [Main shell though..]
@BOSKnight
That's big as hell, how do you fit that on a gun?
@SPWithLizzie the shell is around the size of 2 feet… the casing is 4 foot.
@SPWithLizzie its a 150mm… it’s going to be a little hard to non pen.
@BOSKnight
Still, the explosive filler, the fuse, and the space needed for it could increase drag on the shell, making it have worse penetration at longer ranges
@SPWithLizzie the one I made was the 40mm version. The 150 is a APFSDS shell with the high explosive filler like a HEAT shell.
@SPWithLizzie ours isn’t. It actually pretty good.
@BOSKnight
I know and we're only planning to
APHEFSDS also has kinda doodoo penetration, so just use APDSFS
@SPWithLizzie My 150mm MBT-70 shoots APHEFSDS and HE.
@SPWithLizzie ITS 1953
@BOSKnight
APDSFS, HEAT, and they're planning on depleted uranium shells
@SPWithLizzie possible. What round does it shoot?
@BOSKnight
Rlly?
Then the S-9 must have over 1000mm of penetration
@SPWithLizzie the RNJ tanks are too heavy. He had stated that the front plate was 1000 mm thick.
@BOSKnight
I have S-9's which are very good, especially the gun, and I also have RNJ's tanks, so I have a solid army
Also I'm making an S-variant of the D-350, with weapons similar to the ones on the eagleshark
@SPWithLizzie You could buy some of the MBT-70’s from me. They are the best rn.
@SPWithLizzie this could be a contender to the F-106…
@DeeganWithABazooka
Then the D-350 is the most advanced jet?
@RB107 No, that's not the most advanced airplane because I don't approve of its existence.
@SPWithLizzie can they handle 125mm APHE made by Voytek armed and loaded inside the Pjct. 627 B
I made a INTERNATIONAL TANK RACE