This is a carrier-detacher plane with Offroad Reconnaissance Car LY-10a. I kindly ask you to review the instructions below for the correct use of the aircraft and to prevent accidents.

I N S T R U C T I O N S

MISSION STEP I. TAKEOFF AND CLIMB

1-1 When you're installed on the runway, retract the carrier plane landing gear to prevent any damages of LY-10a.
1-2 Activate AG-1, and them install the throttle in 100% position.
1-3 When you have reached 370 km/h speed, smoothly pitch up your aircraft up to 20-30 degrees. Climb up to 5000 m height.
N O T I C E ! Do not climb up 5000 m heght to prevent LY-10a damaging.

MISSION STEP II. REACHING TARGET POINT, DETACHING LY-10A, AUTO PLANE LANDING

2-1 After cruising, you'll reach the deploying-target point. Start lowering for about 10 km to this point. For 1 km from this point you should be at a height of maximum 400 meters.
2-2 When you reached the point:
2-2-1 Enable autopilot of carrier plane (pressing Enter);
2-2-2 Retract the carrier landing gear to give him the opportunity to land
automatically using autopilot.
2-2-3 Activate AG-2, AG-4.
2-2-4 When you have landed on the surface, disable AG-4.
2-2-5 Start the LY-10a engine pressing AG-3, before it set throttle to 0%
positon.
2-2-6 Unlock the wheel rotators pressing AG-5.
2-2-7 You are ready to spy! Use throttle to control speed
and A/D buttons on keyboard for drive.

C H A R A C T E R I C T I C S

PROPULSION SYSTEM: 2x Blade T3000
TOP SPEED: 440 kph
CRUISING SPEED: 360 kph

A G L I S T
1 - > Carrier-detacher plane engines
2 - > Detacher of LY-10a
3 - > LY-10a engine
4 - > Safe-Landing Parachute
5 - > Wheels Rotation lock/unlock

E N J O Y!