Credit: @Khuoch & @TH0RB0Y

In Simpleplanes,
Welcome To The AW123∆DJI!

This Is A Brand New HDJI A13 With Truck Can Carry Anything Else To Exploring Everything Location With A Landing Pad.

In This Truck To Use:

• Press AG5 To Power On The Engine.

• To Drive Your Vehicle, Lift Up Your Joystick To Driving Your Vehicle.

• Use Throttle On Your Truck To Left And Right. (Not Throttle Up)

• Go Everything On Location After You Driving It.

• In Your Throttle, Use Throttle Down To Brakes And Truck Will Stop.

• If Your In, Turn Off The Engine On AG5 Again.

And Yes. Before Explore, Read The Checklist:

Before Take Off:

1, Activate The Gyroscope. (AG1)

1. Set The Throttle Into 100%.

2. Rotating Up In 50% On The VTOL After Take Off.

3. Then Rotating Up Again In 100% After Take Off.

4. Turn Off The Gyroscope. (AG1 Again)

5. Rotate The Landing Gear.

Before Landing:

1, Set The Gear Down.

1. Turn On The Gyroscope. (To The AG1)

2. Set The VTOL Into 50%, And Approach The Any To The Ground Or Runway & Landing Pad. (Water Landing Has Not Including)

3. Now, Set The VTOL Into 100%, Keep Approaching To The Ground, Helipad, Landing Pad, Or Runway.

4. And Slowly To Land Your Aircraft, Avoiding Damage.

5. And Then, Set The Throttle 0%, After Landing.

And That's It! Enjoy Flying With Your Aircraft.

Happy Flight!