Another updated version. Landing gear=vtol. Flaps=trim. Flight surfaces=group2. Payload operations=group4and5. To use weapons in flight, get to the desired altitude, and level off. Bring down the Flaps, and disable the Flight surfaces. Next, you need to activate the payload and weapons. Enter the payload camera and you should be able to engage targets below you. If you do not disable flight surfaces while using the payload, then the aircraft will move as you move the payload. Any feedback or complaints are more than welcome. Enjoy
Specifications
General Characteristics
- Created On iOS
- Wingspan 85.3ft (26.0m)
- Length 40.8ft (12.4m)
- Height 14.5ft (4.4m)
- Empty Weight 8,195lbs (3,717kg)
- Loaded Weight 11,531lbs (5,230kg)
Performance
- Horse Power/Weight Ratio 0.173
- Wing Loading 21.2lbs/ft2 (103.7kg/m2)
- Wing Area 542.9ft2 (50.4m2)
- Drag Points 4324
Parts
- Number of Parts 122
- Control Surfaces 4
- Performance Cost 645
Thanks for the feed back. I’ll make some changes. I just wanted to keep it as realistic as possible to the 130 KIAS maximum @SamDaMan124
@EmreAtalay ok I got it to fly but its so slow and inefficient. First you need to increase pitch level on props to increase efficiency and power. The pitch is 0 and the plane burns more fuel and getting less range. Learn from this comment. Take care
Can you be more specific? It works for me just fine.@SamDaMan124
This uav does not fly 😒 👎