Profile image

First Functional Push Pull Plane

135 Sn1per01  7.4 years ago

This is the first slightly more difficult plane I have made. Sorry that its terrible, I have just started making my own planes recently.

General Characteristics

  • Created On Mac
  • Wingspan 52.2ft (15.9m)
  • Length 49.0ft (14.9m)
  • Height 14.6ft (4.5m)
  • Empty Weight 7,430lbs (3,370kg)
  • Loaded Weight 10,801lbs (4,899kg)

Performance

  • Horse Power/Weight Ratio 0.37
  • Wing Loading 32.5lbs/ft2 (158.5kg/m2)
  • Wing Area 332.7ft2 (30.9m2)
  • Drag Points 2441

Parts

  • Number of Parts 19
  • Control Surfaces 7
  • Performance Cost 286
  • Log in to leave a comment
  • Profile image
    135 Sn1per01

    @Panzerfausst Thanks for the advice.

    7.4 years ago
  • Profile image

    I have some suggestions:
    1.Change the back landing gear to the same one as the front, because it make the plane goes to right and also the CoM.
    2.Reposition the landing gears at wing and/or change the shape of second control surfaces (the one near the body) as its bad when you roll, you can see the landing gears all the time.
    3.Try changing blade type, thickness and so on, to increase power, its good as it is, but I see room for improvement.

    7.4 years ago