Profile image

I-16 type 27 (V.2)

56.9k bjac0  8.4 years ago
Auto Credit Based on Cedy117's Bjacs I-16 type 27

Speed characteristics are much better thanks to Cedy117. Info: A single-seat cantilever monoplane with a composite construction and retractable landing gear. The I-16 Type 27 is a variant of the I-16 Type 18 fighter equiped with an M-62 engine and the same wing-mounted cannon armament as on the I-16 Type 17, which was created based on the I-16 Type 10 in the same way. The I-16 Type 27 was powered by the 9-cylinder air-cooled Shvetsov M-62 radial engine with a rated output of 800 hp. The engine possessed a double-speed central drive supercharger which increased its altitude limit. The plane was equipped with the AV-1 variable-pitch propeller with a larger propeller spinner. The I-16 Type 27's armament consisted of two 20 mm rapid-firing Shpitalny-Vladimirov ShVAK aviation cannons with 150 shells each. The cannons were located in the wing's central section outside the propellar interference zone. The fuselage housed a portion of the cannons' ammunition. The cannons were fed by tubes located behind the fuselage's first former and running across the central wing section along a forward longeron. The new cannons led to an increase in the airplane's weight and a corresponding reduction in its flight characteristics. For this reason, although the I-16 Type 27 was capable of aerial combat, it was mainly used to attack ground targets or as an interceptor. The I-16 Type 27 was produced in small numbers in 1939. Only 59 were built in total. It saw limited use in the first stage of the Great Patriotic War, primarily as an attack aircraft. (Source: Warthunder)

General Characteristics

  • Predecessor Bjacs I-16 type 27
  • Created On iOS
  • Wingspan 27.2ft (8.3m)
  • Length 18.1ft (5.5m)
  • Height 9.9ft (3.0m)
  • Empty Weight 3,902lbs (1,770kg)
  • Loaded Weight 6,907lbs (3,133kg)

Performance

  • Horse Power/Weight Ratio 0.217
  • Wing Loading 22.4lbs/ft2 (109.6kg/m2)
  • Wing Area 307.7ft2 (28.6m2)
  • Drag Points 1503

Parts

  • Number of Parts 66
  • Control Surfaces 14
  • Performance Cost 321
  • Log in to leave a comment
  • Profile image
    56.9k bjac0

    @DarkPhoeN1X thanks!

    8.4 years ago
  • Profile image

    This is perfect. This was made to fight. It is very acrobatic.

    8.4 years ago
  • Profile image
    56.9k bjac0

    @Cedy117 yeah, but xml is still crshing me, i do same thing as you to get xml parts.

    8.4 years ago
  • Profile image
    77.9k Cedy117

    I can't Xml mod either and I'm a top user I save every Xml moded part I find that's how I have them in my builds @bjac0 your getting a lot better trust me you will get noticed after a while it took me a very long time to get noticed and then I started to really put hard work in to my planes then I got more noticed maby try make your planes more eye catching like a cool paint job or small details remember to save xml modded parts because you may need them some time you can take any parts you want from my planes if you like

    8.4 years ago
  • Profile image
    56.9k bjac0

    @Cedy117 i insist, also i have noticed that not much people have been checking out my stuff, and considering how fast higher ranked players are gaining the're ranks, its either i get noticed a bit more or i perish like the other 14K , and its not my choice, the 14K players that simpley stopped uploading made really nice planes, but then xml editting squashed them, and i'm next...

    8.4 years ago
  • Profile image
    77.9k Cedy117

    It's all right I just helped you plus all I did was fix the speed @bjac0

    8.4 years ago
  • Profile image
    56.9k bjac0

    @DeezDucks @IStoleYourMeme a new and improved version!

    8.4 years ago
  • Profile image
    56.9k bjac0

    @Cedy117 btw, you're allowed to post this plane on you're account aswell ;)

    8.4 years ago