Well guys i cant get this to fly and i need help i painted it to look like a carrot so it doesnt atract to much attention but anyway im having a glitch with my prop engines were when i pitch my aircraft starts losing speed and hight usually falling to the ground at a weird angle i can manage to sort this ive stripped it down to extremely low drag and it still happens so plz help and tell me if you have some results :-)
Specifications
General Characteristics
- Successors 2 airplane(s) +28 bonus
- Created On iOS
- Wingspan 22.6ft (6.9m)
- Length 25.6ft (7.8m)
- Height 10.8ft (3.3m)
- Empty Weight 4,520lbs (2,050kg)
- Loaded Weight 5,423lbs (2,460kg)
Performance
- Horse Power/Weight Ratio 0.368
- Wing Loading 26.8lbs/ft2 (130.7kg/m2)
- Wing Area 202.7ft2 (18.8m2)
- Drag Points 7397
Parts
- Number of Parts 113
- Control Surfaces 11
- Performance Cost 424
@Destroyerz117 you welcome no problem anything to help the SP community out!
Thanks for helping@Tichnarr
@Destroyerz117 Ceased work on the project now, thanks for letting me know!
Hey man I have a working version now so you don't have to make yours but if you have or nearly have ill upvote@Tichnarr
It works now :-)@RhysBrown
Thanks man:-)@RhysBrown
That's not the problem I have full horsepower and the plane only weighs 5000@TMach5
@Destroyerz117 here we go Fixed hopefully this works for you!
Also, increase the blade diameter to 100in. and increase thickness. Change the Roll control panel on the bottom wings to Pitch and invert them for more lift. The tail pitch is insufficient. You will still need to use the Trim function to fly level. Good luck.
@Destroyerz117 i have increased the HP for you! 6000Hp use your trim to take take of at around 150mph.
@TMach5 that too
Well part of your rudder is connected to the pitch, I'm thinking that the wings are just a little to short.
You need to increase the horsepower (HP) to the engine. Click on the engine, click the setting button and slide the HP all the way right.
@Destroyerz117 i will see what i can do for you!
Thanks@Tichnarr
I'll see what I can do to fix it!