I am making replica of Yak 36 and really don't know why it is so unstable after takeoff. AG 1 is vertical takeoff. When i will finish my work, i will credit you!
Specifications
General Characteristics
- Successors 1 airplane(s) +14 bonus
- Created On Windows
- Wingspan 48.7ft (14.8m)
- Length 62.0ft (18.9m)
- Height 17.8ft (5.4m)
- Empty Weight 22,041lbs (9,998kg)
- Loaded Weight 37,327lbs (16,931kg)
Performance
- Power/Weight Ratio 1.083
- Wing Loading 75.6lbs/ft2 (369.1kg/m2)
- Wing Area 493.8ft2 (45.9m2)
- Drag Points 11056
Parts
- Number of Parts 218
- Control Surfaces 7
- Performance Cost 1,147
I guess that you solved it
Basically, the center of mass needs to be further up
I had the same problem with my engine on my newest plane, so that is why I asked you to make a zero thrust engine. The actual engine was inside the plane, so the center of thrust was close to the y axis for the center of mass
I think the problem is that the engines are too far in the front for vertical takeoff and the engines are also too low, so when it would propel the plane forward, it would also make the plane flip
@Trainzo check my posts. I made it
@JolyLoly , cool so see you soon with your new plane . I like Russian planes .
@Trainzo i've already found decision and plane is almost ready
An upvote for the work done even if it is not finished .
@JolyLoly , Hello, I'm watching this evening and I'll let you know.
@JolyLoly I will post it after I’m done fixing it
@JolyLoly yeah just take out the ones in the front
@Tank6376 really? Thank you!
@JolyLoly add 2,000 lb to the nose and make it not need to start with AG1 on have it set to VTOL because that’s what it for
@Tank6376 VTOL takeoff, coz after disabling gyro it making flips and even if you can stabilise it, plane won't maneuver
@JolyLoly what is the problem is it the VTOL takeoff or normal takeoff EDIT NVM
@methirasoysa123 @OmegaDestroyer @Noname918181 @FranzPeterSiegfried