Profile image

Hohen Ho-40 F-4 Falke

25.4k TWDDerSharkmarine  1.7 years ago
Auto Credit Based on WinsWings's Fighter Under 100 parts, Challenge [CLOSED]

Ho-40 F-4 Falke (P.1043)


[Description]

The Hohen Flugzeugwerke Ho-40 (also known as P.1043) is a planned Trislandia Fighter-Interceptor, designed in 1940 following an order issued by the RLM for Project Träumerei, out of the three preliminary design, the P.1043-2 was chosen, a fairly conventional and conservative but unusual design for Trislandian aircraft, having a single integrated pod for water cooler plus oil cooler in an arrangement that exploit the so called "Meredith Effect", the aircraft were to be made as light as possible, to maximize performance out of the obsolescent RMW VS20-V12AU made way back in 1934, the same engine used on the P.1035 Enzian that becomes the golden standard of Trislandian aircraft design back then, however, because the order to Hohen was issued much later than their competitors (it is speculated that this can be an act of sabotage and trade monopoly), Riese and Elfenhaven, before Hohen could even made a wooden mockup, the first Riese RF-10 Taifun soared trough the sky, breaking every and all records of the time, with performance way ahead of its time than any aircraft in the world, the RLM is immediately and fully satisfied with the RF-10, merely glancing over other designs made by other companies by this point, Ernest Höhen is furious about the choice and attempted to sue Riese for foul play, however, RLM has fully set on the track, and ordered all other aircraft under the sqme project to be canceled, and the Ho-30 Falke has become Ernest Höhen Ultimate Fighter, that never was.


[Controls]

Normal Controls


[Specification]

Performance
• Max.Speed: (planned) 685 km/h (425 mph) @ 3,000 m (9,842 ft)
• Cruise Speed: 425 km/h (295 mph)
• Service Ceiling: 14,000 m (45,900 ft)
• Powerplant: (planned) Riese Motorenwerke RMW VS20-V12AU V-12 inverted liquid-cooled piston engine
• Performance: WEP 2,100 hp (1,566.0 kW) at 2,800 rpm @ 25,000 ft (7,620 m)

Arnaments
• 2 × 15 mm MG-15/65 cowling mounted machine gun with 500 rpg
• 2 × 30 mm Mk-30/75HG wing mounted autocannon with 240 rpg


[Creation Used In Thumbnail]

my own K-Klasse Schlachtschiff K-013 König, not available for download

Spotlights

  • This craft is curated
  • WinsWings 1.7 years ago

General Characteristics

Performance

  • Horse Power/Weight Ratio 0.354
  • Wing Loading 39.9lbs/ft2 (195.0kg/m2)
  • Wing Area 165.2ft2 (15.3m2)
  • Drag Points 1221

Parts

  • Number of Parts 100
  • Control Surfaces 5
  • Performance Cost 530
  • Log in to leave a comment
  • Profile image

    I am so mad at myself for missing that one little mistake in the cockpit area, and the fact that i can't update the XML either kills me even more

    Pinned 1.7 years ago
  • Profile image
    1,335 MtecCommand

    This thing is COOOL.

    1.5 years ago
  • Profile image
    1,335 MtecCommand

    @TWDDerSharkmarine i tried to discord you but you thought i was too sketch

    1.5 years ago
  • Profile image

    @MtecCommand oh hi, long time no see, how you're doin

    1.5 years ago
  • Profile image
    1,335 MtecCommand

    @TWDDerSharkmarine hi

    1.5 years ago
  • Profile image

    @Krikkit42 ah i see, i'll look into it then

    +1 1.7 years ago
  • Profile image
    2,992 Krikkit42

    Can’t be file size, SP builds rarely crack the 2mb mark. And the XML for this build is only 69kb if I’m not mistaken. Have you tried the workaround method for mobile devices? You can find a helpful guide here. Had the same problem before, now everything works perfectly for me. Link: https://www.simpleplanes.com/Forums/View/1572349/XML-Update-tutorial
    @TWDDerSharkmarine

    1.7 years ago
  • Profile image

    @Krikkit42 either (apparently) wrong file or too large file size, which i have a proposal, increase file size to 5mb

    1.7 years ago
  • Profile image
    2,992 Krikkit42

    @TWDDerSharkmarine Wait, how come you can’t update the XML file?

    1.7 years ago