This complex mix pich and roll control. Use it if can be usefull (I'll be gratefull if you'll give me the elevons credits and if you upvote this)
Specifications
General Characteristics
- Created On Windows
- Wingspan 16.1ft (4.9m)
- Length 11.7ft (3.6m)
- Height 5.1ft (1.6m)
- Empty Weight 551lbs (250kg)
- Loaded Weight 551lbs (250kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 127
Parts
- Number of Parts 1
- Control Surfaces 0
- Performance Cost 38
@Baldovino Yeah 15 was fine for the elevons, I used 8 degrees for the ruddervators which I made myself. Took a while! I also Modded them so the rotators were all in the same spot
@TheStapler Remember, if you need a different movement than 15 or 30 degrees, you must adapt it in XML. Sorry for this, but I can't do better.
@Baldovino I've got it up now, thanks!
@TheStapler sure! :) happy to be helpfull for you.
I'll be using this in my modded xfa27, if that's OK with you? I'll put your name in the description of course
@JolanXBL Can be used for trimming (using VTOL input) or directly for pitch/roll leaving the whole surface with or without mobile part. The adjustment needed is only in speed and range of motion.
Look at my ECC - 3 for example of use
Is it for minor adjustments while in flight?
well, good idea I guess...