Profile image

Shenyang J-5 [Mobile friendly]

5,459 pingxiangsmzy  4.0 years ago
25 downloads

The j-5 is a fighter, a Chinese version of the mig-17. It took me seven hours to build this, and I was very tired. Material: fighters - 5 (English: Shenyang J - 5 or F - 5, NATO code: Fresco, the mural) fighter, is China's state-owned 112 factory in Shenyang (now called: avic Shenyang aircraft industry group company) in the 1950 s imitation single-seat single-shot first generation fighter, is China's first manufacturing and equipment of air force high subsonic jets. The j-5 is based on the Soviet mig-17 (mig-17f) fighter, which USES a sweepback, single-wing aerodynamic layout with nose air intake. The j-5 aircraft has an all-metal structure, small size, light weight and good low-altitude maneuverability. It is equipped with a Chinese imitation turbojet 5 engine. The development of j-5 began in October 1954, and the final assembly of the first j-5 was completed on July 13, 1956, with all self-made parts made by China. On July 19, 1956, the j-5 prototype was successfully piloted for the first time by test pilot wu keming. The j-5 was officially put into batch production in September 1956 and was discontinued in May 1959, with a total of 767 aircraft in production. Later, based on the j-5, chengdu aircraft plant developed the j-5 jia and j-jiao -5 aircraft, which were successfully tested in November 1964 and 1966 respectively. The development of the j-5 marked China's emergence as one of the few countries in the world capable of producing fighter jets in bulk...............control: VTOL:Flaps....................................Activate1:Throw drop tank???,,,,,,,........Finally, have a good time

General Characteristics

  • Created On Android
  • Wingspan 55.2ft (16.8m)
  • Length 56.7ft (17.3m)
  • Height 20.3ft (6.2m)
  • Empty Weight 16,904lbs (7,667kg)
  • Loaded Weight 26,555lbs (12,045kg)

Performance

  • Power/Weight Ratio 0.761
  • Wing Loading 21.9lbs/ft2 (106.8kg/m2)
  • Wing Area 1,214.5ft2 (112.8m2)
  • Drag Points 14930

Parts

  • Number of Parts 231
  • Control Surfaces 9
  • Performance Cost 948
  • Log in to leave a comment
  • Profile image

    歼-5是一种战斗机,是米格-17的中国版本。我花了七个小时才建成这个,。材料:歼击机-5(英文:沈阳歼-5或F-5,北约代号:壁画,壁画)歼击机,是中国国有的112家工厂,位于沈阳(现称:中航沈阳飞机工业集团公司)20世纪50年代仿制的单座单发第一代歼击机,是中国空军第一个制造和装备高亚音速的飞机喷气式飞机。歼-5是基于苏联米格-17(米格-17f)战斗机,它采用后掠角,单翼气动布局,机头进气。歼-5飞机采用全金属结构,体积小,重量轻,低空机动性能好。它配备了一台中国仿制的涡喷5发动机。歼-5的研制始于1954年10月,第一架歼-5的总装于1956年7月13日完成,所有零部件均由中国制造。1956年7月19日,歼-5原型机首次由试飞员吴克明成功试飞。歼-5于1956年9月正式批量生产,1959年5月停产,共生产767架飞机。后来,成都飞机厂在歼-5的基础上,研制出歼-5JIA和歼-JIA5飞机,分别于1964年11月和1966年11月成功试飞。歼-5的发展标志着中国成为世界上少数几个能够批量生产战斗机的国家之一………….控制:VTOL:襟翼 AG1:抛副油箱?,,,,,,,……最后,祝大家玩得愉快

    Pinned 4.0 years ago
  • Profile image
    12.0k Hellosss38

    Thanks
    @AltoClef

    3.9 years ago
  • Profile image

    @DClass I like some of your creations,especially the SCP-330

    3.9 years ago
  • Profile image
    12.0k Hellosss38

    Why did you follow me?
    @AltoClef

    3.9 years ago
  • Profile image

    可这"No Upvotes",说明没几个人关注这架飞机

    4.0 years ago
  • Profile image

    @AltoClef 额

    4.0 years ago
  • Profile image

    @pingxiangsm 支持支持,很不错!

    4.0 years ago
  • Profile image

    你好

    4.0 years ago