Profile image

G13-Octo1 MK8F Interceptor

711 Mysweetbologna  4.8 years ago
38 downloads

The Octo1 Interceptor MK-8

The Octo1 was intended for air to air combat, with its powerful, 24 chamber M-series miniguns. It can fire at 6,000 RPM with its main cannons. It uses liquid oxygen to cool and increase combustion power, making it reach speeds of up to 2500m/s. With such devastating spread, it can destroy most planes within 3-4 miles of range or less. The design was created by G13, funded by the SAUC. The SA-SF (Supersonic Air-Superiority Fighter) project was kickstarted by the SAUC to provide a fast, maneuverable and cheap aircraft for Southeast Asian air forces. 8 designs were submitted to be prototyped and tested, but the Octo1 was the favored design as it excelled in speed, maneuverability and firepower. It can reach up to ~2400 km/h or roughly ~1400 mph. Maximum recorded speed was 2942 km/h or 1549 mph or just under Mach 2. The craft is moderately armored, and replaced the South Korean T-50 Golden Eagle as a main fighter in the Philippines, being much faster, locally made and 33% cheaper albeit weighing 3x more than that of the T-50 because of some lower-end materials being used.

The Philippines sold its 12 T-50s to replace them with 16 G13-Octo1s.

Weaponry:

2x Inferno Missile = $117K • 2
-Total: $234K/?12M

4x Guardian Missile = $603.8K • 4
-Total: $2.42M/?124.2M

6x Interceptor Missile = $300K • 6
-Total: $1.8M/?92.4M

2x G13-M1F 30mm Gatling = ?994K • 2
-Total: ?1.99M

2x G13-M2B 39mm Gatling = ?998.6K • 2
-Total: ?2M

1x G13-M10C Magnus 60mm Gatling = ?1.14M •1
-Total: 1.14M

2x G13-M90A Ballista Prototype B 90mm Hi-Vel Cannon = ?1.36M •2
-Total: ?2.72M

Weaponry Total:
?236.5M/$4.6M

Aircraft cost:
?1,004,610,950

Absolute Total:
?1.24B

Export cost:
?1.18B/$23M (Aircraft only)

=====CONTROLS=====

AG1 for the M1F and M2B Gatling guns

AG2 for the M10C Magnus and M90A Ballista Prototypes

AG3 for the glowing reticle

AG4 for the air brakes

AG5 to activate Infernos and Guardians

AG6 to activate Interceptors

AG7 for afterburners

AG8 for main engines

Cam1 for cockpit.

=NOTE=

Do not use mirror on the aircraft, it will ruin the cockpit. It’s also my first time making a cockpit interior so it doesn’t look very good, but I enjoyed making it and I hope you enjoy it too!

General Characteristics

  • Created On iOS
  • Wingspan 50.0ft (15.3m)
  • Length 48.0ft (14.6m)
  • Height 21.0ft (6.4m)
  • Empty Weight 12,961lbs (5,879kg)
  • Loaded Weight 47,536lbs (21,562kg)

Performance

  • Power/Weight Ratio 4.254
  • Wing Loading 86.0lbs/ft2 (420.0kg/m2)
  • Wing Area 552.6ft2 (51.3m2)
  • Drag Points 3816

Parts

  • Number of Parts 263
  • Control Surfaces 12
  • Performance Cost 1,213