because there are no tutorials on how to build decent boat hulls, i made one:
step one, build a 3 layer block with the bottom one with curves.
step two, expand it to the front with a curve in the hull.
step three, place air inlets, or however you call them, on the front and make the whith, or something, 0 so it becomes the wanted shape
step four, angle the inlets to your liking.
step five, expand the hull to the back
step six, make place for the transmission and propelor thingies.
step seven, finish the hull with a round end and proceed to the ballance thing
step eight, the black pieces are filled with floating to max and 50 lb dead weight.
step nine, the red pieces are filled with fuel (only the big ones, not the small)
step ten, ballance the ship to your liking and you are done
Specifications
General Characteristics
- Successors 6 airplane(s) +119 bonus
- Created On Windows
- Wingspan 40.8ft (12.4m)
- Length 183.9ft (56.1m)
- Height 21.3ft (6.5m)
- Empty Weight 72,480lbs (32,876kg)
- Loaded Weight 449,346lbs (203,820kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 14834
Parts
- Number of Parts 43
- Control Surfaces 0
- Performance Cost 134
@Stephen77 sorry for replying late, but you need to out a VTOL engine in or on the Hull and soms of the VTOL thrusters in the back of the ship and in the front, on the Bottom of the Hull, be aware that the thrusters move in the direction you want Them to do to turn the ship. I hope this helps
How do I add effective propulsion and turning?