Available for Export
Overview
A descendant of the GB-11A Kite, the GB-11B Kite is a much more sophisticated, versatile, modern, and improved version of the original “A” model. The main features of the GB-11B that are not present of the GB-11A include but are not limited to: A smaller vertical stabilizer, improved missile guidance, lighter paint and materials, improved performance, improved thrust-to-weight, the addition of IR missiles (The GAPM-11), and twice the countermeasures (suited for IR and radar missiles). The GB-11B Kite will be used for more advanced threats, and to better protect Spin against the rapidly changing battlefield. The GB-11B was first designed in 1950, and changes to the design were made in 1951. Now, in 1952, it is ready. Because the original vertical stabilizer was so tall in the original aircraft, it developed problems. It was meant to prevent instability in supersonic flight, but created violent vibrations in the rear during flight above 790 mph. To help reduce vibrations, two small vanes/fins were added in front of the inlets to help focus airflow away from specific points that would induce such vibrations. The GB-11B can be used in ground strikes unlike the GB-11A. The targeting pod under the belly of the aircraft is meant to aid in the use of guided munitions via laser-guidance.
Instructions
AG1 — Tail hook
AG4 — Navigation lights
AG5 — Formation lights
AG7 — Open/close canopy
AG8 — Gyro
Gallery
Enjoy!
Specifications
Spotlights
- This craft is curated
General Characteristics
- Predecessor FIGHTER JET CHALLENGE (closed)
- Successors 1 airplane(s) +70 bonus
- Created On iOS
- Wingspan 34.3ft (10.5m)
- Length 53.9ft (16.4m)
- Height 14.3ft (4.4m)
- Empty Weight 10,396lbs (4,715kg)
- Loaded Weight 21,227lbs (9,628kg)
Performance
- Power/Weight Ratio 0.952
- Wing Loading 65.7lbs/ft2 (321.0kg/m2)
- Wing Area 322.9ft2 (30.0m2)
- Drag Points 1040
Parts
- Number of Parts 386
- Control Surfaces 7
- Performance Cost 1,651
If you want to be tagged on future builds, please go [here]
@BOSSentinel well uh, thanks!
@MiGlover You can buy from Yourpan. Pole-land and I had very good relations.
@B1BLancer ok
@Supersoli8 not there yet. Just got back from Space Camp in Huntsville Alabama so I had no time to work on SP or reply on the website
@MiGlover again, you must improve relations with Spin. Pole-Land had very bad relations with us
@B1BLancer , if this is part of @DeeganWithABazooka Knock-Off Earth RP , then can I buy around 30 of them please and if not this version then ill gladly take the A variant
P.S. Pole-Land
How much did cost?
@Supersoli8 np
Ok, thx
@Supersoli8 ok. Once I finish it I will make yours with the paint job and post it for you.
C
@Supersoli8 So you are ordering the C model and the B model? Or just the C or just the B?
@Supersoli8 okay thank you.
Here
@Supersoli8 ok. Take the side view of the GB-11B right above the comments and upvotes on this post. Then draw on your desired paint job and insignia. Link me the screenshot via gifyu.com and I will do the rest. Also tell me what color you want the general plane to be.
Yes I would like you to do that
@Supersoli8 no. It would be free of charge
@B1BLancer hmmmmm, would that add a cost?
@Supersoli8 maybe I can make a version with your air force’s insignia and identification with your own desired paint job.
@Supersoli8 ok. I will try and complete it earlier. Do you also want a specialized version? If so what do you want on it?
@B1BLancer I’ll wait
@Supersoli8 like 3 days maybe
How long of a wait (irl time)
@Supersoli8 The C model will have improved weapons capacity, maneuverability, agility, and range. And yes, everything I make is made on iOS.