A replica? I had the "correct" gun shield "frames" and the "correct" armature and the "correct" gears and the "correct" handles and a "correct" recoil and a "correct" base, so I guess it's fine.
DO NOT RECONNECT!
Some parts in this build are positioned really close to each other. If done improper (trust me it happens more often that it should), the loading breech and the part near the gun shield can "jam up" and not function.
Group 1 for "extended" rotation.
Specifications
General Characteristics
- Created On iOS
- Wingspan 14.8ft (4.5m)
- Length 24.3ft (7.4m)
- Height 9.6ft (2.9m)
- Empty Weight 2,233lbs (1,012kg)
- Loaded Weight 2,233lbs (1,012kg)
Performance
- Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 6118
Parts
- Number of Parts 112
- Control Surfaces 0
- Performance Cost 324
Minor mistake:
The lower cylinder (should) house the return spring, and the upper cylinder is the damper. It should be connected to the breech block via the small vertical fuselage block, and the arm (horizontal small fuselage block) should extend outward.