Profile image

areo-namics D-112 diablo

55.6k PapaKernels  3.7 years ago

This is a simple jet that I made. Its really not that complicated and I forgot what I based it off of. I was going to put weapons on it but I thought it would be cool to be a stunt jet so no weapons.

Takeoff procedure
1. Set throttle to 100%
2.wait til you hit about 300-400mph and pull up
3. Retract LandingGear
Landing procedure
1.set throttle to about 5-10%( less is better though)
2.Line up to the runway and have your LandingGear down
3. Once you've touched down then cut throttle and brake

Gallery

In the air doing some maneuvers

Sitting at base

Scanning for enemy forces around carriers

General Characteristics

  • Created On Android
  • Wingspan 27.6ft (8.4m)
  • Length 25.3ft (7.7m)
  • Height 10.7ft (3.3m)
  • Empty Weight N/A
  • Loaded Weight 15,268lbs (6,925kg)

Performance

  • Power/Weight Ratio 4.415
  • Wing Loading 98.1lbs/ft2 (478.7kg/m2)
  • Wing Area 155.7ft2 (14.5m2)
  • Drag Points 1838

Parts

  • Number of Parts 20
  • Control Surfaces 6
  • Performance Cost 279
  • Log in to leave a comment
  • Profile image
    55.6k PapaKernels

    @47parzival41 ooooooooohh haven't seen it yet unfortunately.

    3.7 years ago
  • Profile image
    55.6k PapaKernels

    @47parzival41 and what does that name mean parzival? I dont even know how to pronounce it lol

    3.7 years ago
  • Profile image
    55.6k PapaKernels

    @47parzival41 well it gets there pretty quickly and well I honestly only took it off from the ground 2-3 times before I posted it, also with the landing I just guessed that was the best procedure from the 2 times I actually landed. I didn't do to much of ground testing I mainly spawned it in the air and made sure it flew good

    3.7 years ago
  • Profile image

    nice plane!

    3.7 years ago
  • Profile image

    Cool! Would you check mine ??

    3.7 years ago