MAIN CONTROLS:

PITCH - Tank Moves forward / Backward
YAW - TANK moves sideways or turns left l right
CAM AIM SCREEN SWIPE - TURRET and RCWS movement

AG5 - Main Gun Turret Activation, 200mm Gun

AG6 - Right Side Secondary Armament activation, 30mm Rotary Cannon w/ KORD 12.7mm HMG

AG7 - Left side Secondary Armament activation, 30mm Rotary Cannon w/ KORD 12.7mm HMG

LANDING GEAR - Laser APS (automatically active when gameplay starts)

---

(how to operate Active Protection System)

1. Go to any RCWS camera screen
2. APS is already active due to landing gear button always active
3. Aim at the enemy missile/ bomb/ rockets using the green circle crosshair in the middle of it
4. Click FireGuns (miniguns) to intercept any incoming air threats

---

how did I make this APS?

basically I xml modded the Miniguns bulletScale, Lifetime and Spread nearly to Zero.

NOTE: turn off LandingGear APS when not in use, minigun and cannon active at the same time will give you innacurate predictor, turn on LandingGear APS when you are target locked by a missile

---

OTHER CONTROLS (optional):

Throttle - lift ammo tray upward
AG1 to AG3 - Rammer Pushes 1st to 3rd Tank round
AG4 - retracts Tank Ammo Holder to guide the pathway of the tank ammo straight to the cannon breach
AG8 - LIGHTS ON / OFF
TRIM UP - Retractable Commanders Sight Camera
VTOL UP - Open all Tank Hatches

---

TANK INFORMATION:

Kadnikov Defense Dynamics.

Prototype: Objekt 240
tank name: T-200A "Bogatyr"
Class: SHMBT (Super Heavy Main battle tank)
Price per unit: 150 million USD

---

General information

The T-200A Bogatyr is a Super Heavy Main Battle Tank (SHMBT) developed as a classified prototype by Kadnikov
Defense Dynamics.
Its primary role is direct breakthrough and area-denial warfare against heavily fortified positions,
enemy super-heavy armor platforms, and hardened infrastructure. The vehicle is optimized for frontline shock
operations in environments where conventional main battle tanks are unable to survive or maneuver effectively.
The tank is armed with a 200 mm smoothbore cannon fed by a three-layer carousel autoloader, allowing the
employment of high-mass kinetic penetrators and multi-purpose heavy munitions. The weapon is specifically
intended to penetrate and destroy heavily armored targets in a single decisive strike, enabling rapid neutralization of
super-heavy vehicles, reinforced bunkers, and hardened command structures without the need for repeated
engagements. Secondary 30 mm rotary cannon CIWS systems provide autonomous defense against aerial threats,
guided munitions, and close-range targets, enhancing the vehicle’s survivability in high-threat environments.
Protection is provided by ceramite-based composite armor, a material derived from Warhammer 40,000–class
military applications and engineered for extreme battlefield survivability. Ceramite offers exceptional resistance to
high-energy and thermal threats, including directed-energy weapons, plasma-based munitions, shaped-charge jets,
and sustained thermal exposure. Its layered molecular structure disperses heat and kinetic stress across the armor
mass, significantly reducing penetration, spall, and structural degradation under repeated impacts. When combined
with extensive explosive reactive armor coverage and active protection systems, the T-200A is optimized for
high-intensity frontal engagements and prolonged exposure to concentrated enemy fire.
Due to its exceptional combat weight, the T-200A is not intended to cross conventional bridges. Instead, it is
designed to conduct submerged riverbed crossings, utilizing a fully sealed hull, electric propulsion, and a closed-loop
life-support system. This capability allows the vehicle to bypass infrastructure limitations, re-emerge onto land, and
immediately resume combat operations, maintaining operational momentum during offensive advances across
complex terrain

---

TopSpeed:

Open land / paved roads: 60 km/h (37 mph)
Rough / off-road terrain: 35–40 km/h (22–25 mph)
Urban / confined areas: 20–25 km/h (12–15 mph)
Riverbed submerged transit: 8–12 km/h (5–7 mph)

---

Weight: 180 tonnes
general armor type: Ceramite material warhammer40k (hull base, chassis, main turret base, turret roof,
gun barrel)

---

TOTAL DIMENSON SIZES:

width 24.2ft (7.4m)
Length 68.9ft (21.0m)
Height 17.8ft (5.4m)
Main Turret Rotation Speed: 28-20 seconds per full 360 degrees rotation
Main Turret Max Elevation: 43 degrees upwards

---

OTHER SIZE:

200mm barrel length: (38.8ft from internal to external)
hull length: 47.2ft
hull height: 8.1ft
hull width: 24.2ft
Turret Base length: 40.2ft
Turret Base Height: 11.2ft (14.5ft with RCCIWS)
Turret Base width: 23.1ft

---

Crew: 7
1 Tank Commander
1 Tank Main turret gunner
1 Driver
2 RCCIWS remote weapon crew (OR 30mm RCWS opererate autimatically)
2 other crew (repairmen)

---

Armaments:

1x 200mm 3 layer Carousel Autoloader Smoothbore cannon (48 rounds)
(Maximum elevation: 43 Degrees / Minimum Elevation: -5.5 Degrees)

2x 30mm Rotary Cannon CIWS (2x 1350 rounds)
(Maximum elevation: 85 Degrees / Minimum Elevation: -7.5 / 15 Degrees)

2x 12.7mm NSV KORD RCWS (2x 400 rounds)
(Maximum elevation: 30 Degrees / Minimum Elevation: -30 Degrees)

---

Protection systems:

(((309 total relikt era bricks)))

18x side hull small Relikt Era bricks
54x side hull Large Relikt Era bricks
27x front hull relikt era bricks
70x side turret relikt era bricks
120x top turret relikt era bricks
20x side RCCIWS relikt era bricks

48x Smoke Grenade Launchers

2× Vanguard LAPS (Laser Active Protection System):
classified hard-kill defensive suite
that disperses tightly controlled short-range laser bursts to intercept incoming munitions
,utilizing autonomous targeting logic to eliminate threats without risking damage to the host vehicle.

---

Engine: Izdeliye-300 “Yadro-M”:

classified hermetically sealed autonomous power
core delivering uninterrupted electric propulsion to heavy armored platforms
capable of extended submersion and covert river-bed transit
operating indefinitely without refueling.

---

OTHER EQUIPMENTS:

Oxygen Generator: VO-1 “Vozdukhod”

The VO-1 “Vozdukhod” is a closed-loop oxygen generation system that provides life support for the crew of the
T-200A Bogatyr. Operating within the fully sealed hull, it continuously produces breathable oxygen using advanced
electrolysis and molecular separation technologies. Integrated air circulation and carbon-dioxide scrubbing systems
maintain stable atmospheric composition and pressure, ensuring crew survivability during surface combat in airless
or low-atmosphere environments, as well as extended submerged riverbed operations.

---

Surface-Adaptive Winch System (SAWS) (not featured in SP BUILD)

Type: Tank recovery/climbing equipment
Function: Pulls the tank from underwater riverbed or steep terrain onto the surface
Components: Winches, ceramite-armored cables, circular Polarisite anchors (Adaptive Polarity Material)

Material Info: Polarisite is a rare, solid, crystalline rock-like mineral with metallic properties, appearing as a dense,
dark metallic-crystal composite. Strong and durable, it generates programmable adaptive polarity fields at the
molecular level and was discovered on a distant planet or asteroid; refined into circular anchors for SAWS.
(“Polarisite is an extraterrestrial material discovered in outer space and does not naturally exist on Earth.”)

Deployment Mechanism: The Polarisite anchors are stored inside the front upper hull, hidden behind armored
panels. When activated, the winches propel the circular anchors forward like a hidden blade, using controlled
winch tension and mechanical acceleration to breach the water surface. The anchors land on the target surface,
activate their adaptive polarity fields, and lock in place. The winches then reel in the cables, pulling the tank upward
and forward onto the surface.

Winch Cable Info: The SAWS cables have a strong inner core for bearing extreme loads, surrounded by a
ceramite armor sheath. The ceramite protects against heat, cutting, and battlefield damage, while the core carries
the tank’s weight. This allows the cables to support a 180-ton tank during underwater recovery or slope climbing.

---

Features:

1. Works on any surface: sand, soil, rock, snow, ice, metal
2. Programmable adhesion modes
3. Assists 180-ton tank during underwater exit or slope climbing
4. Quick deployment and retraction

Tracks only (no SAWS):
20–25° maximum
Limited by traction and ground shear, not engine power

SAWS-assisted slope exit:
40–45° sustained, repeatable climb
Up to ~50° in short, controlled recovery pulls