DO THE FOLLOWING STEPS IN ORDER: To prepare for takeoff activate 1 and 2, pull VTOL all the way up and put on full throttle. As soon as you get into the air pull up the landing gear and activate 4 and then activate 5 quickly after. As soon as you reach 500 mph deactivate 2 and pull the VTOL a tiny bit higher than half way up. When you get to 200 mph glide down to 200 ft above the sea. Stay at a hovering position while activating 3. Then quickly deactivate 1 and activate 6. Once the drone is released into the air you can fly it freely until the fuel runs out. When the drone crashes you can switch camera views to the main aircraft, activate 1 and 2 keep the VTOL a little bit higher than half way while you takeoff. Once in the air pull VTOL all the way up and fly however and wherever you want. When you land the main aircraft, activate 7. Once you start to figure out how the controls work, you can start to change the order of steps and tinker the whole aircraft component. CONTROLS: 1: Activates VTOL engines 2: Activates main engines 3: Activates drone engines 4: Detaches mini surveillance drones from main aircraft 5: Activates mini surveillance drone parachutes 6: Detaches drone from main aircraft 7: Releases landing parachute Rate the aircraft component if you like it. Happy holidays