Profile image

Nick's F-4a

0 papanick2  8.4 years ago
5 downloads

This plane doesn't reach high mach numbers, but it's a lot of fun and extremely deadly. The high speed turning is really good, and with all of the weapons removed and a good pilot at the controls this plane can beat the Trench Run race while averaging a speed of 550-600mph (you may miss a ring or two, but you'll be so far ahead it won't matter--I didn't say it was easy). For better turning performance press 1 to activate pitch-controlled air brakes. Be careful--extremely?– tight turns while flying slower than 450/475mph can result in a nasty (but recoverable) stall.

General Characteristics

  • Created On Mac
  • Wingspan 22.7ft (6.9m)
  • Length 34.3ft (10.5m)
  • Height 12.2ft (3.7m)
  • Empty Weight 8,002lbs (3,629kg)
  • Loaded Weight 12,770lbs (5,792kg)

Performance

  • Power/Weight Ratio 1.759
  • Wing Loading 55.0lbs/ft2 (268.6kg/m2)
  • Wing Area 232.1ft2 (21.6m2)
  • Drag Points 1970

Parts

  • Number of Parts 59
  • Control Surfaces 5
  • Performance Cost 314
  • Log in to leave a comment
  • Profile image

    to many missiles

    8.4 years ago
  • Profile image

    I screwed up and the air brakes aren't bound to group 1. You all will have to do it yourselves. My bad.

    Here's how:

    1. select the two airbrakes on top of the jet engines
    2. click properties
      3.bind the brakes to group 1 and 'pitch'
      make sure the brakes are inverted
    8.4 years ago