Profile image

ADM-100 Early Stage 2

615 AlexDrone00  1.1 years ago
14 downloads
No Tags

For english go below


ADM-100 EARLY STAGE 2

Este es el avión sin terminar pero cerca de estar terminado. Esta nueva versión cuenta con superficies de control mas avanzadas y una secuencia de encendido simple e incompleta. Aquí hay una lista de las cosas añadidas:

Interior:
-Panel de electricidad (Batería, Master eléctrico)
-Panel de luces (Luces de aterrizaje, luces, de rodaje, luces anti-colisión y luces de navegación)
-Panel Hidráulico (Cola, Tren de aterrizaje y alas)
-Mejora en la palanca de los flaps y en la del tren de aterrizaje
-Se cambiaron los instrumentos por un PFD

Exterior:
-Se añadieron spoilers que actúan con los alerones
-Los alerones actúan como spoilers cuando el avión esta en el suelo
-Los estabilizadores verticales actúan como spoilers cuando el avión esta en el suelo
-Se añadió una ametralladora en la parte delantera del avión
-Luces exteriores en el avión

Otro:
-Se redujo el tamaño de la parte móvil del estabilizador horizontal
-Se redujo el ángulo de giro de la rueda delantera

Notas:
El avión no esta terminado ni perfeccionado, así que vuela un poco extraño

Esta planeado que este avión tenga una cabina detalla con un procedimiento de encendido "realista", todo con código de Funky Trees. Quiero aclarar que no soy experto ni nada en el código, de hecho me considero bastante malo en ese ámbito, pero no esta mal para iniciar.

El ADM-100 Striker es un caza de combate desarrollado por AD Aircraft Manufacter. Tendrá una ametralladora y unos misiles Aire a Aire, aunque también un misil Aire a Tierra.


This is the unfinished but near completion aircraft. This new version features more advanced control surfaces and a simple incomplete ignition sequence. Here is a list of the things added:

Interior:
-Electrical panel (Battery, Electrical Master).
-Light panel (Landing lights, taxi lights, taxi lights, beacon lights and navigation lights)
-Hydraulic Panel (Tail, Landing Gear and Wings)
-Improved flap lever and landing gear lever.
-Instrumentation changed to a PFD.

Exterior:
-Spoilers that act with the ailerons were added.
-The ailerons act as spoilers when the aircraft is on the ground.
-Vertical stabilizers act as spoilers when the aircraft is on the ground.
-Added a machine gun on the front of the plane
-Exterior lights on the aircraft

Other:
-The size of the moving part of the horizontal stabilizer was reduced.
-Reduced the turning angle of the nose wheel.

Notes:
The plane is not finished or perfected, so it flies a little strange.

This plane is planned to have a detailed cockpit with a "realistic" ignition procedure, all with Funky Trees code. I want to clarify that I'm not an expert or anything in the code, in fact I consider myself pretty bad in that area, but it's not bad to start with.

The ADM-100 Striker is a fighter developed by AD Aircraft Manufacter. It will have a machine gun and some Air to Air missiles, although it will also have an Air to Ground missile.

General Characteristics

  • Created On Windows
  • Wingspan 37.4ft (11.4m)
  • Length 40.3ft (12.3m)
  • Height 12.2ft (3.7m)
  • Empty Weight 15,885lbs (7,205kg)
  • Loaded Weight 18,821lbs (8,537kg)

Performance

  • Power/Weight Ratio 0.955
  • Wing Loading 53.8lbs/ft2 (262.5kg/m2)
  • Wing Area 350.1ft2 (32.5m2)
  • Drag Points 3434

Parts

  • Number of Parts 181
  • Control Surfaces 10
  • Performance Cost 959