This is the flight management computer (FMC) from the SWL-120's cockpit. You can explore its functionality with the FMC by itself which is why I decided to upload it. To turn it on, press AG 1. You can navigate its pages fairly easy; text with an arrow (<>) next to it will either link to another page or do an action. All subpages have a "<RETURN" or "<PREV PG" button to go back.
Some inputs have specific requirements. I haven't made a full manual yet, but some main examples are:
- The flight plan (HOME > ROUTE > FLTPLN > ) needs the input to be a valid waypoint. What counts as a valid waypoint depends on what mod plugins you have enabled in the setup page. To view all waypoints, go (HOME > WYPTS > ) and select either "DEFAULT" or any enabled mod plugins. The "CUSTOM" page allows you to create up to four custom waypoints, which may also be used in the flight plan.
- Inputs with squares need the input string to be as long as the number of boxes. Inputs with dashes can have less than, but no more than the number of dashes.
- Some inputs only accept numbers.
Again I haven't made a full guide yet and randomly felt like posting this; feel free to explore around and if you have any questions simply ask me.
As seen in my advanced autopilot video, the FMC has deep integration with the plane's autopilot and isn't simply a fun decorative part. The flight plan in particular gets used with the autonavigation.
Specifications
Spotlights
- B1 27 days ago
General Characteristics
- Created On Windows
- Wingspan 16.8ft (5.1m)
- Length 16.4ft (5.0m)
- Height 30.6ft (9.3m)
- Empty Weight 1,554lbs (705kg)
- Loaded Weight 1,554lbs (705kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 0
Parts
- Number of Parts 138
- Control Surfaces 0
- Performance Cost 3,046
@PlaneFlightX fr doom maybe can lag those janky low end device to fireworks
@Boeing727200F Not quite lol.
That's an easy way to delay the release date a few years though
Can it run doom?
@PlaneFlightX i think its half done. but i like it on my b2-HS even tho its not civilian
Tis is i wanted
@PlaneFlightX challenge accepted lol
@PlaneFlightX i better not start seeing ts i see on the rv12is
lp4-4,lb4-3,lp4-3.5,lp3-4
an426adblahblahblah
kn1000-08d
i call it rivet gun because it rhymes with grug
@Boeing727200F I have screws, which will be replaced with even more detailed screws when I eventually mod all the cockpit details (a no mods version will of course be available). Honestly, to go any further would require me to use textures and spend too much time working on this, far beyond the loop of "I'm better now, let's replace this 2 year old part". I would be perpetually working on the plane, remaking every part forever. This has been my most complicated project ever, and will likely remain the most complex aircraft I ever make for a long time. Anything I make in SP2 will be slightly simpler, especially in the general construction due to the new parts.
Speaking of wiring, I do have a fully simulated electrical system which you can view on the EICAS display (not in this build).
@blt for sure
this man might beat the Yamato 1945
@GorillaGuerrilla If you can figure out how to add it sure
can i use this on my planes? if any? maybe later?
jesus christ man how detailed are you going?
are you going to put ALL THE WIRING INTO THE CONSOLE
wow