Unlisted
No Tags
Auto Credit Based on DaDerpachu123's MiG 18 F-27 Franco
i reduced the drag to about 10% of what it previously was and now the engines are at 0.55 power
Specifications
General Characteristics
- Predecessor MiG 18 F-27 Franco
- Successors 1 airplane(s) +14 bonus
- Created On iOS
- Wingspan 24.2ft (7.4m)
- Length 35.9ft (10.9m)
- Height 12.4ft (3.8m)
- Empty Weight 8,397lbs (3,809kg)
- Loaded Weight 14,861lbs (6,740kg)
Performance
- Power/Weight Ratio 1.512
- Wing Loading 69.7lbs/ft2 (340.2kg/m2)
- Wing Area 213.3ft2 (19.8m2)
- Drag Points 181
Parts
- Number of Parts 124
- Control Surfaces 5
- Performance Cost 449
@DaDerpachu123 I basically just reduced the drag on everything. It previously had over 2000 drag points and now has less than 200. Drag is basically what limits the speed and aircraft can go to in SP at least. So when you reduce it, you can also reduce the power output of the engines. The lower the engine power, the longer it will take to reach the max speed allowed by the drag. To sum up, reduce drag and reduce engine power
@Mustang51 Nvm, I just looked at the True Air Speed and it shows 900mph
@Mustang51 Now it seems to take forever to get supersonic. Is that how it is supposed to be? May you tell me how you did it so I can edit it to my liking?
@Mustang51 Ok, I'll test it out
It has a very high takeoff and stall speed so you might want to add some more wing area. I’d recommend around 100-180ft^2 more
@DaDerpachu123