Profile image

Eucadian Warhawk (V4.0)

5,883 KillaDanDaMan  7.8 years ago

Some basic hints and instructions: Press 1 to activate main thrusters | Press 2 to activate VTOL thrusters (Which can be turned into afterburners if f you move the VTOL slider all the way up). 3 controls the wings; Vtol slider middle: is hover and landing | Slider all the way up is for horizontal flight. (I recommend changing the the vtol slider then press 3 and quickly disable 3 for quick and efficeint transitions between modes) Yaw (Q & E) controls the rotation of f the front mounted turret.( Navigation Lights press 5 ............NOTICE: Taking off in hovermode results in nose tippings 9/10 times. Take off normally with primary thrusters and as soon as you hit 90-100mph proceed to horizontal flight (Vtol slider up & double tap 3) This is all I can think of for right now if there are any concerns or problems please comment and let me know, I put alot of time into this aircraft. Have fun and Thank you for downloading my design! P.S I am going to get this 3D printed eventually

General Characteristics

  • Successors 1 airplane(s)
  • Created On Windows
  • Wingspan 21.3ft (6.5m)
  • Length 18.0ft (5.5m)
  • Height 12.9ft (3.9m)
  • Empty Weight 12,850lbs (5,829kg)
  • Loaded Weight 14,614lbs (6,628kg)

Performance

  • Power/Weight Ratio 2.46
  • Wing Loading 43.0lbs/ft2 (210.0kg/m2)
  • Wing Area 339.8ft2 (31.6m2)
  • Drag Points 2608

Parts

  • Number of Parts 90
  • Control Surfaces 8
  • Performance Cost 491