Hi Guys...

Here is my new plane that I build. Its the A320 Lufthansa aircraft. It took me 3days(whole day) building this. The plane is only 90% finished, I didn't finished some small details 'cause the plane is lagging my phone, maybe next time if my PC will be fixed.

Here are the controls:

Activation Groups;
1- Landing Lights
2- Flaps(VTOL-UP), Reverse Thrust(Brake)
3- Navigation and Strobe Lights
4- Taxi Lights
5- Other Lights
6- RAT(VTOL-UP)
7- PUSHBACK(Throttle)
8- Becon Lights, Engines

Notes:
*(OPTIONAL-if you want to role play an emergency landing using RAT) After take-off and you reach your altitude cruise, position the FLAPS to its normal and deactivate 2.

*The RAT is only a design and it may not help during(or shutting the engine off) flight.

*when landing with RAT deployed make sure that your descend is smooth. This may prevent the RAT from hitting the ground.

*when Taking-off Throttle to 80% not 100% to experience a real take off. When using 100% it make the plane go up with out using the pitch.(you can see it to your self)

*The plane may tilt abit sideways cause of the RAT being placed.

*It may Lag on some mobile device so try using a PC.

Reminder:
RAT use during Landing
*When deploying the RAT during landing make sure that the flaps are position for landing. When the activation 6 is deactivate the RAT retract so position first the flaps.

Tips:( I just give some tips to help those others who are having difficulties)

using the RAT
* The RAT can't move this plane, unlike the real one, so try lowering the throttle to have a good and smooth landing. When deploying the FLAPS when the RAT is delpoyed just activate 2 the FLAPS will be deployed in full.

Landing on Wright Final Approach
*descend to 400~350ft and maintain it till reaching the runway. When your near the runway descend to 250 and Land your plane smoothly (wright airport is 245ft above sea level).