A Japanese carrier-borne fighter biplane produced in the 1930s. Never saw combat but operated on Akagi, Kaga and Hosho. The aircraft was made double seated as a trainer, under designation A3N3.
This replica tried to simulate the aircraft as best as possible (ignore the 1000hp engine, as temporarily I couldn’t XML.) with realistic flight characteristic.
Notice : Landing hook operation
Landing on small vessel such as IJN Chisana requires the pilot to be going at below 70mph, preferably 60 on touchdown. Prior to touchdown, toggle on AG-1.
Specifications
Spotlights
- ThePrototype 5.3 years ago
General Characteristics
- Successors 1 airplane(s)
- Created On iOS
- Wingspan 31.3ft (9.5m)
- Length 21.7ft (6.6m)
- Height 10.6ft (3.2m)
- Empty Weight 3,809lbs (1,728kg)
- Loaded Weight 3,809lbs (1,728kg)
Performance
- Horse Power/Weight Ratio 0.262
- Wing Loading 11.2lbs/ft2 (54.7kg/m2)
- Wing Area 339.9ft2 (31.6m2)
- Drag Points 3918
Parts
- Number of Parts 101
- Control Surfaces 10
- Performance Cost 370
@AnoniMosu okay
Japan’s second naval fighter. @BlackhattAircraft
@AnoniMosu oh
It was the navalfighter before the A4N, which is before the A5M which is before the zero. @BlackhattAircraft
This was the naval fighter before the Zero right?