Version 1.0
Hello everyone
This is Skibus-1. My first project created from scratch. Everything before that was remakes, and I just took the existing aircraft as a basis and modified it in some way, including the Reysober 180 and the DHC-8-Q400. Although they are very different from the originals.
SO...
SKYBUS-1!
The Skybus-1 is a twin-engine, narrow-body, high-wing cargo and passenger aircraft developed by Skybus Alt Air in the late 1990s. The aircraft is a hybrid of passenger and cargo aircraft. In front there are the doors of the cockpit and the cabin with 72 seats in a single-class layout according to the scheme 3+3. ++3 flight attendants. in the middle there is a passage between the cabins, 2 fuel tanks, a huge landing gear and a wing mount. In the rear there is a large cargo compartment with a volume of 203 m3, a tail unit and an APU.
The rear compartment opens to the side in the tail section. (DO NOT OPEN IN THE AIR!!!)
The aircraft is equipped with General Electric CF6 X.Dfs21.1 engines with a thrust of 183 kN. By the way, it took a very long time to choose the engine. First they wanted to install the PW4000, then the CFM 56-5c and finally settled on the sf6. The aircraft is equipped with double flaps, the upper part of which is used as interceptors. The wing has a slight sweep with a transverse angle B equal to 2.57 °. An interesting fact is that the length of the wing and the length of the fuselage are the same - 138.8 feet. The landing gear is tricycle and very strange, more like a fighter's landing gear.
IT LOOKS LIKE THIS IS IT.
Now the instruction manual.
Ag1. High-speed brakes included
Ag2. Strobe lights
Ag3. Landing lights
Ag4. Interior lighting
Ag5. The left front door is open
Ag6. Reverse gear
Ag7. Open cargo compartment
Ag8. Engines

SPEEDS
V1- 110 kn
Rotation - 127 kn
Landing - 123 kn
Dumping - 104 kn
That's all! Have a nice flight!!!