Profile image

RF30 ''Spear''

90 CheesyBoi  3.1 years ago

A gen 2 fighter jet. My most detailed build so far

INSTRUCTIONS:

For takeoff, set thtottle to 15% and pull up at roughly 230 km/h

In flight, the plane has a tendency to pitch up when the engine is running at high power, so apply trim to counter this

For landing, keep the throttle over 10% or you might lose lift and stall. Use the trim if needed

Use AG1 for detaching the external fuel tank

Use AG2 to extend the drogue parachute

Use AG3 to jettison the missiles/bombs on the pylons

SPECS:

Max speed: 1100 km/h

Takeoff speed: 230 km/h

Landing speed: 300-350 km/h

Stall speed: did not test it yet

Fuel: 1500L + 150L

Armament: 4x 20mm autocannons with 200 rds each, 4 pylons, and chaff to avoid missiles

PLEASE ASK FOR PERMISSION IF YOU WANNA MAKE SOMETHING BASED OFF THIS

General Characteristics

  • Created On Android
  • Wingspan 39.3ft (12.0m)
  • Length 33.4ft (10.2m)
  • Height 15.0ft (4.6m)
  • Empty Weight 7,531lbs (3,416kg)
  • Loaded Weight 10,457lbs (4,743kg)

Performance

  • Power/Weight Ratio 0.644
  • Wing Loading 69.1lbs/ft2 (337.3kg/m2)
  • Wing Area 151.4ft2 (14.1m2)
  • Drag Points 5241

Parts

  • Number of Parts 114
  • Control Surfaces 5
  • Performance Cost 574