Today I will also release an APC from Panchenkov Motors. After that I will start working on the cruiser. ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀Virbelwind 2 is a Panchenkov Stratiafto 2025, on which the K180 module manufactured by KhBZ is installed. The K180 is a launcher with two cluster projectiles that fire together. The cluster projectiles will need to be manually disengaged using an activation group after the projectile has traveled approximately 70% of its distance and MUST be pointed towards the surface. When the projectile is activated, it throws out 8 bombs in sync with another projectile. When the surface is reached, an area will be affected that is shaped like two brackets: (⠀). The second projectile is fired only a second after the first, this is done so that the projectiles do not explode each other when activated. The installation also has a cannon, but it is only needed to use its sight to determine the trajectory of cluster munitions. I also added holders for the car itself so that on uneven surfaces I wouldn't have to constantly press the brake. ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀Group 1 - Lights⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Group 2 - Emergency lights⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Group 3 - Release cluster carriers⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Group 4 - Release cluster shells⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Group 5 - Release holders ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Group 6 - Activate holders ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ VTOL for horizontal turret turning. Trim for vertical. Have fun!