Ok so I've made a car and it acts like the left wheel is getting more power than the right, weight is evenly distributed, and so is drag. So I don't know what to think, please help!
Ok so I've made a car and it acts like the left wheel is getting more power than the right, weight is evenly distributed, and so is drag. So I don't know what to think, please help!
@MoterKade np, thanks anyways!
@RedHawk Hey just was checking it out. Yes both left side wheels were out on the Y axis. But I think you are right on the idea that size and weight may be a problem. I tried even adding a 1000lbs but it still says there is only 1lb. It looks fantastic but maybe to small to get any traction. I even dropped the engine out put and had no effect. Sorry I couldn't help you more.
@MoterKade oh, I'd have to check, even if it's not out I could turn it slightly in the opposite direction to counter it, thanks!
Do you use Fine Tuner? If so check the wheel to make sure they are in fact pointing straight. I find sometimes when I mirror wheel the are off a couple degrees. Basically the toe is out. It will always pull even with balanced weight. Just reset the wheel buy settings it back to zero. That is what seems to work for me. Just an idea. Hope it helps some.
Cheers MoterKade
@jsaret @TrainDude I think it's problem is it's size, no working suspension or anything so :/
@jsaret here
@RedHawk care to post it? I can examine it
@Rcb1235 it really is, it shouldn't do this what so ever
@RedHawk Strange...
@Rcb1235 tried that too XD
Maybe one of the wheels is spinning in the wrong direction. Make sure the wheels on the right have their "engine direction" set to normal, and the wheels on the left set to reverse. Hope this helped!
@Patrick20206 yes both are
Is the wheel connected to the engine?