So you may know about my D-01-200, an airliner meant to compete with the 737 and A320.

Well, I wasn't very satisfied with the flight performance of the -200 (it would only take off at 400km/h, which is absurdly high for an airliner), and decided to revamp its flight model. In the process, I then decided to add... well... just a few things.

Introducing the midsize (and most common) variant of the D-01: the D-01-300. This, specifically, is the passenger-to-freighter (P2F) variant.

New Features

Flight Model

• Made the flying process smoother.
• Takeoff speed reduced by 100km/h, and the aircraft's mass nearly halved.
• Added horizontal stabiliser trim. (yay!)

Cockpit

• Added trim wheel
• Added till (the thing used to steer the plane on the ground)
• Added rudder pedals (I finally figured out how to make them)
• Made the throttle lever slightly more realistic
• Changed colour of the dashboard
• Heading screen isn't just a compass gauge anymore

Exterior

• Added "mask" to the cockpit windows so it looks cooler
• Added those tiny antennas/probes on the fuselage
• Changed the passenger doors
• Added winglets!

The P2F exclusively features:

• Opening passenger and cargo doors
• Full cabin interior (I won't add cargo)

As for part count? Well, it's increased from 500 to almost 700, but the aircraft should still be manageable on good smartphones.

If you guess the livery I'll be putting onto this plane from the below image, you get 3 upvotes. Answer below in the comments!

And one last thing:

T to be tagged!