Profile image

N2 Explosive Mine Prototype

2,538 Rowlypoly  1.6 years ago

Building this creation really opened my mind to the endless possibilities of stuff you can make in SP. This build is a special mine that is set of by a pressure trigger. How it works is pretty simple. First a weight is dropped on the shell of the mine causing the shell to shift down on its springs. The shifting of the shell then causes special leverage mechanisms to swing two explosive arms into the main explosive causing the whole thing to explode. This happens very fast because of how the leverage works. And if you’re wondering, no the weight is not setting off the explosives. I did many tests with dropping the weight directly on the explosive and it did not explode. Also if pressure is applied too slowly to the mine, the explosive will not explode. Yes, I know this is big for a mine so I hope someone can miniaturize it and upload it. Also, this does not work in slow motion, the leverage mechanisms don’t perform correctly. The only thing slow motion is good for is seeing how the leverage mechanisms work without the whole build blowing up in less than a second. Hope you guys enjoy! Happy Flying & Upvote For More!

Spotlights

General Characteristics

  • Created On iOS
  • Wingspan 23.0ft (7.0m)
  • Length 29.5ft (9.0m)
  • Height 25.5ft (7.8m)
  • Empty Weight 11,712lbs (5,312kg)
  • Loaded Weight 16,462lbs (7,467kg)

Performance

  • Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
  • Wing Area 0.0ft2 (0.0m2)
  • Drag Points 18278

Parts

  • Number of Parts 141
  • Control Surfaces 0
  • Performance Cost 504