Profile image

Torn Tail

38.2k hypnotoad  6.5 years ago
4,979 downloads
No Tags

Heya guys. hope this all finds you well. trying to get some speed back into my planes again as they have been rather massive as of late ;) so a smaller (but still kinda massive) faster jet. please wait for her to get up to at least 250mph before a slight pull back to take off. she's level at around 800mph and handles well at lower speeds aswell, though pitch does have a tendency to rob a lot of speed if used at full lock for too long. all the very best as always.

General Characteristics

  • Successors 3 airplane(s) +56 bonus
  • Created On Android
  • Wingspan 103.1ft (31.4m)
  • Length 151.5ft (46.2m)
  • Height 11.5ft (3.5m)
  • Empty Weight 7,561lbs (3,430kg)
  • Loaded Weight 39,520lbs (17,926kg)

Performance

  • Power/Weight Ratio 0.568
  • Wing Loading 6.1lbs/ft2 (29.6kg/m2)
  • Wing Area 6,519.4ft2 (605.7m2)
  • Drag Points 5972

Parts

  • Number of Parts 103
  • Control Surfaces 20
  • Performance Cost 624
  • Log in to leave a comment
  • Profile image
    1,577 2416creeper
    @hypnotoad dang this thing can turn on a dime I love it!!!
    6.4 years ago
  • Profile image
    @BeastGaming0 hi can you help me reching 25 points? check my last airplane: "bomber man vertical landing" and rate it if you want
    6.4 years ago
  • Profile image
    @hypnotoad hi can you help me reching 25 points? check my last airplane: "bomber man vertical landing" and rate it if you want
    6.4 years ago
  • Profile image
    @hypnotoad hi can you help me reching 25 points? check my last airplane: "bomber man vertical landing" and rate it if you want
    6.4 years ago
  • Profile image
    Hay I saw u talk to kingdeadshot and what I like to do is take planes and make bombers out of them I'd like to know if I could show u and if u like it u could help me get known in the community kingdeadshot liked my plane I built for him can u give me a shot @hypnotoad
    6.4 years ago
  • Profile image
    @hypnotoad I was on 123D Sculpt and made this for you. A Hypnotoad. Is 3d in Sculpt but 2d there. http://imgur.com/CLpLa6V
    6.4 years ago
  • Profile image
    3,443 Mkenz
    @hypnotoad You still alive?
    6.4 years ago
  • Profile image
    @hypnotoad i decided to create a new account i think i will call it MesmerizedFrog in honor of you
    6.4 years ago
  • Profile image
    4,015 Hypixel
    I am back!
    6.4 years ago
  • Profile image
    Sorry to bother you again hypnotoad but the plane falls apart on the runway and the plane I made that works the flaps go the right way but it glitches and to go up I have to put the joystick up instead of down
    6.4 years ago
  • Profile image
    25.2k JacobHardy64
    You Broke 30K congrats!
    6.4 years ago
  • Profile image
    7,082 geekr
    Five! ★★★★★☆. I ll add one if the sys has 6 lol.
    6.4 years ago
  • Profile image
    I'm actually in the process of making one @hypnotoad
    6.4 years ago
  • Profile image
    3,683 LjSpike
    @hypnotoad hey hypnotoad, I have a challenge, make a non-hypno-plane plane! ✈️✈️✈️
    6.4 years ago
  • Profile image
    Thanks. I use your planes for inspiration @hypnotoad
    6.4 years ago
  • Profile image
    38.2k hypnotoad
    @Benjthelegend Really pleased that worked. ill be sure to check them out shortly (been off working for the past 3 days so ill hopefully find time shortly :) )
    6.4 years ago
  • Profile image
    38.2k hypnotoad
    @StevenQuartzUniverse Please feel free, any time :)
    6.4 years ago
  • Profile image
    38.2k hypnotoad
    @LjSpike Thanks for the tips buddy, much appreciated :) Yes dude, I have those included (im not a modder myself at all, but I have modded parts) they are in the toolbox I posted. A modded fuel tank (think its x20 or x10, and moddded structural wings, thought im not sure if they can hold fuel. Hope that helps dude
    6.4 years ago
  • Profile image
    Would you mind if I used this for another plane
    6.4 years ago
  • Profile image
    Thanks hypnotoad before I was building a spine down the middle but now it works great!@hypnotoad
    6.4 years ago
  • Profile image
    3,683 LjSpike
    @hypnotoad Do you think you might be able to share a modded fuel tank of 10x fuel and a modded structural wing with a control surface and 10x fuel capacity? (It'll help my get my wing weight right.)
    6.4 years ago
  • Profile image
    3,683 LjSpike
    @hypnotoad Remember that a central front 1 is generally very crucial, then whatever number of ones set to the side, to protect it from a forward collision. Attaching them to a strong point of the plane (somewhere which is connected to the cockpit via blocks and structural wings) is useful as well. the height which you place the plane above the pontoon changes the effectiveness of the pontoons. You want to greatest height difference between the majority of the plane and pontoons, while still keeping the pontoons (and landing gear) stable on runway or skimming of the water.
    6.4 years ago
  • Profile image
    11.2k ahappyape
    Stonking mate
    6.4 years ago
  • Profile image
    38.2k hypnotoad
    Alright buddy. Thanks for the reminder dude, they are still in my sub assembly, I always forget to encorperate them as I will always get carried away into the design first, I'll have to remember to build them in from the start, thanks again buddy @LjSpike
    6.4 years ago
  • Profile image
    38.2k hypnotoad
    Afternoon sir, hope this finds you well. Thanks very much for your rating chap, much appreciated, really pleased you like this one. I have the sliding issues all the time, each and every one of my planes does this, until I add vertical stabilisers , if you add them near the back and sweep them back, making them tall, you will be able to overcome the sliding effect, you can also add them near the front or at the end of wing tips, do try this out and let me know. All the best @Benjthelegend
    6.4 years ago
  • Log in to see more comments